Vehicle Level Validation Test Procedures for V2V Safety Communications
J3161/1A
This document provides vehicle-level data collection, data analysis, and data verification procedures that may be used to verify that an instrument under test (IUT) satisfies the vehicle-level requirements specified in SAE J3161/1. For the purposes of this report, “vehicle-level requirements” primarily consist of those requirements which can be verified external to the vehicle. The IUT for these procedures is a configured LTE-V2X vehicle-to-vehicle (V2V) device as defined in SAE J3161/1 and is installed on a light vehicle or public safety vehicle . While the IUT is conceptually separated from the vehicle it is installed on, the tests outlined in this document are primarily vehicle-level so the terms “vehicle” and “IUT” can generally be considered interchangeable. Additionally, non-vehicle-level complimentary tests, not included in this document, are required to verify that the entire set of requirements specified in SAE J3161/1 is satisfied.NOTE: Aside from the vehicle-level data collection, data analysis, and data verification procedures that are in common between light vehicle and public safety vehicle, this document provides some vehicle-level data collection, data analysis, and data verification procedures which are exclusive for public safety vehicles (see Appendix A).This document also includes a Traceability Matrix to provide traceability between SAE J3161/1 sections and the test procedures. This can be used to ensure thoroughness of testing coverage. The traceability matrix in Section 7 correlates test procedures from this document with the sections in SAE J3161/1 being tested.The SAE J3161/1 sections that are addressed in this document are indicated in Table 1. SAE J3161/1 major section numbers that are indicated as N/A do not contain any requirements (subsections may include requirements). Sections that are not in scope, such as standards profiles, are expected to be tested and verified as part of device-level certification, done prior to the vehicle-level testing described in this document.
Rationale: The first version of SAE J3161/1 describes the minimum requirements for transmission of Vehicle-to-Vehicle (V2V) Basic Safety Message (BSM), and there are potential improvements in the LTE-V2X system that can further boost the performance of BSM transmission. The new version of this document provides complementary test procedures and adjustments based on the improvements defined in SAE J3161/1.