Search Results

In recent times, due to the improvement of internal cylinder flow analysis technology with Computational Fluid Dynamics (CFD), the prediction accuracy of fuel consumption and emission has improved. However, small motorcycles often have complex intake ports which restrict the layout of injectors. Therefore optimization of injection spray to achieve high combustion efficiency and less wall wetting is a challenge. In this study, we predicted fuel consumption and emission performance by the simulation result of air fuel distribution and wall wetting amount with an actual motorcycle engine model. We optimized injector nozzle length, spray angle and spray tip penetration. After the optimization, we evaluated the emission performance and fuel consumption with an actual engine. As a result, we were able to confirm the improvement of fuel consumption and emission performance.

The advanced development and optimization of fuel atomization in port and direct injection systems for automobile engine is desired for the improvement of fuel combustion performance and thermal efficiency of the engine. Computational prediction and design of injector nozzle spray flow is an effective method for that. However, a practical simulation method of the continuous primary, secondary spray breakups and the spraying behavior have not been developed yet. In this study, we have developed the integrated computational method of the total fuel atomization process of the injector nozzle. This new computational approach is taking into account the nozzle internal flow to form the primary breakup using Volume of Fluid (VOF) method in connection with the spray flow characteristics to the engine cylinder using Discrete Droplet Model (DDM).

Fuel spray injected by a port injector has significant effects on engine power output and combustion efficiency. For this reason, it is necessary to atomize fuel into fine droplets and accurately supply it without being susceptible to any changes in temperature or negative pressure affected by engine. This document introduces an atomization technique with optimized layout of nozzle holes and drastically reduced pressure loss (energy loss) in the flow under a needle valve seat. It also describes an injector having a short fuel flow path and a small dead volume under the valve seat, which can have good resistance against any changes in temperature and negative pressure.