Refine Your Search

Search Results

Viewing 1 to 2 of 2
Technical Paper

Evaluations of the Recommended New Parts for the Hybrid III Dummy - Neck Shield and Hip Joint

1996-02-01
960450
Three improvements for the Hybrid III dummy parts are proposed by NHTSA, they are the neck shield, hip joint, and ankle joint In this paper, two modifications of the three, the neck shield and hip joint, are evaluated The recommended neck shield was tested and compared to the previous type to investigate the following, 1 The effect of the neck moment on both the recommended and previous type, and 2 The comparison between the stiffness of the neck shield and human soft tissue under the chin, using a volunteer static test From these tests, the new recommended neck shield performed better than the previous type with respect to both biofidelity and the effect on the neck moment test The neck shield for 5th-percentile female was also considered The hip joint recommended by NHTSA was compared with the modified joint and pelvis proposed by Toyota It was found that the NHTSA's recommended hip joint eliminated the hip lock due to metal-to-metal contact It was also found that the maximum rotation angle of the NHTSA's recommended hip joint was less than that of the hip joint and pelvis proposed by Toyota
Technical Paper

Development of an Abdominal Deformation Measuring System for Hybrid III Dummy

1994-11-01
942223
A new abdominal deformation measuring system for Hybrid III dummy has been developed in order to evaluate the abdominal injury by using the dummy. From the dynamic abdominal deformation of the dummy, the abdominal compression velocity V, the compression ratio C, and the maximum value of the product VC, expressed as [VC]MAX, can be calculated. This abdominal deformation measuring system consists of an abdominal insert having the same compression characteristics as those of the human body, a dynamic deformation sensor, and an analysis program. The abdominal insert is made of elastic foam rubber and has a shape fitted to Hybrid III. The deformation sensor in a band shape is a thin stainless steel band with 25 strain gauges on it. Each strain gauge measures the curvature on its mounted position. Since the deformation sensor is located along the surface of the dummy abdomen, the sensor deforms as the dummy surface deforms.
X