Search Results

Composite bearings of PTFE as the base material have been widely used for automotive parts. However, in recent years, due to downsizing, faster sliding speeds, and tendency to increase the bearing load with high performance, particularly for boundary lubrication conditions, the PTFE-based composite bearing is often worn, making it difficult to apply to some applications. A high strength polymer was selected as an alternative to PTFE base material, and the mechanical properties and performance in a start-stop test, reciprocating sliding test and seizure test were evaluated. Focusing on the characteristics of high strength, by applying a PEEK resin, in each evaluation, it was confirmed that superior performance was achieved compared with a conventional PTFE based composite bearing. Presenter Yohei Takada, Daido Metal Co., Ltd.

Composite bearings of PTFE as the base material have been widely used for automotive parts. However, in recent years, due to downsizing, faster sliding speeds, and tendency to increase the bearing load with high performance, particularly for boundary lubrication conditions, the PTFE-based composite bearing is often worn, making it difficult to apply to some applications. A high strength polymer was selected as an alternative to PTFE base material, and the mechanical properties and performance in a start-stop test, reciprocating sliding test and seizure test were evaluated. Focusing on the characteristics of high strength, by applying a PEEK resin, in each evaluation, it was confirmed that superior performance was achieved compared with a conventional PTFE based composite bearing.

Suzuki Motor Corporation unveiled the Burgman Fuel Cell Scooter (Burgman FCS) at the “TOKYO MOTOR SHOW 2009”. It is a simple and high-efficiency fuel cell scooter, which is equipped with a compact and unique air-cooled fuel cell system, jointly developed with the UK firm, Intelligent Energy Ltd. In order to evaluate the vehicle performance and find any powertrain related issues from actual road and traffic conditions, it has been tested in a fleet testing program supported by the UK Technology Strategy Board (TSB), in UK since February 2010. In addition, seeking for different operating conditions, it is planned to provide it in 2011 to a further field test to be held in Japan. Additionally in March 2011, it obtained Whole Vehicle Type Approval (WVTA) in the European Union; the first time this has been achieved for any fuel cell vehicle. This proved that it has achieved the high level environmental acceptability and safety requirements which are essential for the practical scooter.