Search Results

Vibration testing is often carried out for automotive components to meet guidelines based on their operational environments. This is an iterative process wherein design changes may need to be made depending on an intermediate model’s dynamic behavior. Predicting the behavior based on modifications in boundary conditions of a well-defined numerical model imparts practical insights to the component’s responses. To this end, application of a general method using experimental free-free condition frequency response functions of a structure is discussed in the presented work. The procedure is shown to be useful for prediction of responses when kinematic boundary conditions are applied, without the need for an actual measurement. This approach is outlined in the paper and is applied to datasets where dynamic modifications are made at multiple boundary nodes.

In tire development, the dynamic tire-road contact forces are an important indicator to assess structure-borne interior cabin noise. This type of noise is the dominant source in the frequency range from 50-450 Hz, especially when rolling with constant angular velocity on a rough road. The spatial force distribution is difficult or sometimes even impossible to simulate or measure in practice. So, the use of an inverse technique is proposed. This technique uses response measurements in combination with a digital twin simulation model to obtain the input forces in an inverse way. The responses and model properties are expressed in the time domain, since it is specifically aimed to trace back the impact locations from road surface texture indents on the tire. In order to do so, the transient responses of the travelling waves as a result of these impacts is used. The framework expresses responses as a convolution product of the unknown loads and impulse response measurements.

The NVH performance of conventional panels and structures is mainly driven by their mass. Silence often requires heavy constructions, which conflicts with the emerging trend towards lightweight design. To face the challenging and often conflicting task of merging NVH and lightweight requirements, novel low mass and compact volume NVH solutions are required. Vibro-acoustic metamaterials with stopband behavior come to the fore as possible novel NVH solutions combining lightweight requirements with superior noise and vibration insulation, be it at least in some targeted and tunable frequency ranges, referred to as stopbands. Metamaterials are artificial materials or structures engineered from conventional materials to exhibit some targeted performance that clearly exceeds that of conventional materials. They consist typically of (often periodic) assemblies of unit cells of non-homogeneous material composition and/or topology.

Maximizing the acoustic attenuation is one of the important design criteria of automotive exhaust systems. Although both analytical and numerical approaches exist to evaluate the acoustic transmission properties of exhaust systems, they are, at present, insufficient to model the full geometrical complexity and to accurately assess the influence of thermal and aerodynamic phenomena onto the acoustic attenuation characteristics. For this reason, an experimental test campaign is often still indispensable to evaluate the aeroacoustic performance of exhaust systems. One of the most commonly used experimental characterization techniques for flow duct systems is the two-port characterization.

The objective of the present study is to experimentally characterize the drag torque in open multi-disks wet clutches. For this purpose, two groups of experiments are performed using an advanced SAE#2 test setup. The experiments are designed under real conditions of variable automatic transmission fluid (ATF) flow rate and higher clutch speed range as experienced by wet clutches in real operation. The first test group examines the influence of parameters such as ATF flow rate, ATF temperature, and disks size whereas, the second test group investigates the effect of disks rotational conditions on the drag torque. By analyzing, the obtained experimental results, the relationship between the amount by which the parameters are varied and the corresponding change in the drag torque are established. In addition, a general qualitative behavior of the drag torque as function of clutch speed is proposed and the associated physical phenomena are explained.

The identification of the contributions of airborne noise sources in vehicles in operational driving conditions is still a cumbersome task. Whereas the measurement of the transfer path from possible noise sources to the observer ear locations is efficient and accurate in most conditions, the source strength identification is still a challenging task. This paper presents the basic concepts of a new source quantification technique based on acoustic pressure measurements close to the operating sources. The main goal of developing a new technique is to achieve a faster and more economic method as compared to existing methods.

This paper presents the design and experimental results of a novel test setup to measure the road impact response of a rotating tire. The test setup is based on a tire on tire principle and is used to analyse mechanisms of tire/road noise during road impact excitations, such as driving on cobbled roads, joints of a concrete road surface, railroad crossings,… A series of test are performed with different driving speeds, cleat dimensions and inflation pressures. Radiated noise, vibrations of the tire surface and spindle forces are measured on the test setup during impact excitations.

In this paper, singular value decomposition, principle component analysis and multicoherence analysis is used to evaluate the number of important degrees of freedom in acceleration based road load data, which constitute the targets for road reproduction experiments on a hydraulic shaker table. It is therefore important to determine from this road data how many degrees of freedom need to be included in the road reproduction experiments. The multi-axial nature of the input and the suspension response is illustrated based on target data from different road surfaces, acquired on the road and on the road dynamometer, as well as on the reproduction results of these tracks using tire patch and spindle based excitation on the K.U.Leuven high frequency multi-axial shaker table.

While CAE methods allow improving nominal product design using virtual prototypes, uncertainty and variability in properties and manufacturing processes lead to scatter in actual performances. Uncertainty must hence be incorporated in the CAE process to guarantee the robustness and reliability of the design. This paper presents an overview of uncertainty-based design in automotive and aerospace engineering. Fuzzy methods take uncertainty into account, whereas reliability analysis and a reliability-based design optimization framework can deal with variability. Key enabling technologies to alleviate the computational burden, such as workflow automation, substructuring and design of experiments, are discussed, and industrial applications are presented.

A key element to bring research advances on intelligent materials to industrial use is that the product CAE models must support such solutions. This involves modeling capabilities for intelligent material systems, sensor and actuator components, control systems as well as their integration in system-level application designs. The final result will then be a multi-attribute optimization approach integrating noise and vibration performance with reliability, durability and cost aspects. As no single integrated solution will fulfill all requirements of the various material and control approaches, the focus of the research is on the use, combination and extension of existing codes and tools.

Tire noise has become a predominant contributor in many traffic noise situations nowadays and hence, the demand for accurate tire noise prediction models is high. A rolling tire is experimentally characterized by means of the substitution monopole technique: the running tire is substituted by the non-operating tire covered by monopoles. All monopoles have mutual phase relationships and a well defined volume velocity distribution which is derived by means of an inverse Airborne Source Quantification technique; i.e. by combining static transfer function measurements with operational indicator pressure measurements close to the rolling tire. Models with varying amounts and locations of monopoles are discussed.

Despite the fact that Transfer Path Analysis (TPA) is a well known and widely used NVH tool it still has some hindrances, the most significant being the huge measurement time to build the full data model. For this reason the industry is constantly seeking for faster methods. The core concepts of a novel TPA approach have already been published in a paper at the ISMA 2008 Conference in Leuven, Belgium. The key idea of the method is the use of parametric models for the estimation of loads. These parameters are frequency independent as opposed to e.g. the classical inverse force identification method where the loads have to be calculated separately for each frequency step. This makes the method scalable, enabling the engineer to use a simpler model based on a small amount of measurement data for quick troubleshooting or simply increase accuracy by a few additional measurements and using a more complex model.

This paper presents the development of a structural model for passenger car tyres, based on a three-dimensional flexible ring on an elastic foundation. The ring represents the belt and the elastic foundation represents the tyre sidewall. The tyre model, which is implemented as a finite element model, is valid below the first treadband axial bending mode and includes a definition of the wheel flexibility and air cavity. The eigenfrequencies predicted by the model are within 5% of the measured eigenfrequencies. The model is validated by comparing predicted with measured responses for both an unloaded and loaded tyre.

OEM's increase the pressure on their suppliers to design, develop and test their products within a short time period. This requires design ‘first-time-right’ philosophy and advanced numerical and experimental methods. Four steps are required to experimentally asses the durability of exhaust systems. Environmental loads and strain references are acquired on the test track. This data is analyzed and damaging are sections retained. These sections are then reproduced on a test rig. During this reproduction, strain is measured at the reference locations and the damage is calculated and compared with the test track data.

One dimensional linear acoustics network models are commonly used for the acoustic design of intake and exhaust systems. These models are advantageous since they allow the characterization of the scattering matrices for individual elements, independent of the upstream or downstream components. For an intake or exhaust assembly, the individual elements can be combined by a simple multiplication of the individual matrices to assess the propagation characteristics of the whole system under consideration. The determination of the scattering matrix coefficients can be carried out in an analytical, numerical or experimental way. Since the analytical methodologies are limited to uniform or simplified mean flow representation and the experimental two-port determination is expensive and time-consuming, a numerical method using the time domain Linearized Euler Equations is proposed in this paper.

The development of new design tools to predict the vibro-acoustic behavior within the vehicle development process is of essential importance to achieve better products in an ever shorter timeframe. In this paper, an energy flow post-processing tool for structural dynamic analysis is presented. The method is based on the conversion of conventional finite element (FE) results into energy quantities corresponding with each of the vehicle subcomponents. Based on the global dynamic system behavior and local subcomponent descriptions, one can efficiently evaluate the energy distribution and analyze the vibro-acoustic behavior in complex structures. By using energy as a response variable, instead of conventional design variables as pressure or velocity, one can obtain important information regarding the understanding of the vibro-acoustic behavior of the system.

This paper proposes a specific parametric model order reduction (pMOR) scheme for the efficient evaluation of beam based structures. The model to be parameterized is a Finite Element (FE) model that represents a generic network of beams with a number of distinct cross-section types. The methodology considers geometrical parameters that describe the cross-section and the material properties of the beams as the design parameters of interest. An affine representation of the model is derived based on the description of the deformation of a uniform beam. This affine representation can be exploited for the hyper-reduction where the evaluation cost of the system matrices is reduced. The reduction of the system matrices is obtained through a projection based approach. For a given number of parameter combinations a modal basis is constructed. A global reduced order basis (ROB) is obtained through a principal component analysis of these local bases.

Active vibration reduction for lightweight structures has attracted more and more attention in automotive industries. In this paper, reduced-order controllers are designed based on H∞ techniques to realize vibration reduction. A finite element model of piezo-based smart structure is constructed from which a nominal model containing 5 modes and validation model containing 10 modes are extracted. A mixed-sensitivity robust H∞ controller is firstly designed based on the nominal structural model. Considering the ease of controller deployment, an order reduction for the controller is then exploited using balanced truncation method. The effectiveness of the reduced-order controller is finally verified on the validation model via system simulations.

Prediction of the drive-by noise level in the early design stage of an automotive vehicle is feasible if the source signatures and source-receiver transfer functions may be determined from simulations based on the available CAD/CAE models. This paper reports on the performance of a drive-by noise synthesis procedure in which the transfer functions are numerically evaluated by employing the Fast Multipole Boundary Element Method (FMBEM). The proposed synthesis procedure first computes the steady-state receiver contributions of the sources as appearing from a number of vehicle positions along the drive path. In a second step, these contributions are then combined into a single transient signal from a moving vehicle for each source-receiver pair by means of a travel time correction.

The investigation of critical noise sources on pass-by noise tests is demanding development of the current techniques in order to locate and quantify these sources. One recent approach is to use beamforming techniques to this purpose. The phased array information can be processed using several methods, for example, conventional delay-and-sum algorithms, deconvolution based algorithms, such as DAMAS, and more recently, the generalized inverse beamforming. This later method, presents the advantage of separating coherent sources with better dynamic range than conventional beamforming. Also, recent developments, such as Iteratively Re-Weigthing Least Squares, increases the localization accuracy allowing it to be used in a challenging problem as a fast moving source detection, a non-stationary condition. The work will raise the main advantages and disadvantages on this method using a practical case, a passenger vehicle pass-by test.