Search Results

Launched on NASA's Aura spacecraft on July 15, 2004, JPL's Tropospheric Emission Spectrometer (TES) has been operating successfully for over three years in space. TES is an infrared high resolution, imaging fourier transform spectrometer with spectral coverage of 3.3 to 15.4 μm to measure and profile essentially all infrared-active molecules present in the Earth's lower atmosphere. It measures the three-dimensional distribution of ozone and its precursors in the lower atmosphere on a global scale. The Aura spacecraft was successfully placed in a sun-synchronous near-circular polar orbit with a mean altitude of 705 km and 98.9 minute orbit period. The observatory is designed for a nominal 5 year mission lifetime. The instrument thermal design features include four temperature zones needed for efficient cryogenic staging to provide cooling at 65 K, 180 K, 230 K and 300 K.

The Tropospheric Emission Spectrometer (TES), launched on NASA's Earth Observing System Aura spacecraft on July 15, 2004 has successfully completed over three years in space and has captured a number of important lessons. The instrument primary science objective is the investigation and quantification of global climate change. TES measures the three-dimensional distribution of ozone and its precursors in the lower atmosphere on a global scale. It is an infrared (IR) high resolution, imaging Fourier Transform Spectrometer (FTS) with a 3.3 to 15.4 μm spectral coverage required for space-based measurements to profile essentially all infrared-active molecules present in the Earth's lower atmosphere. The nominal on-orbit mission lifetime is 5 years. The Aura spacecraft flies in a sun-synchronous near-circular polar orbit with 1:38 pm ascending node.

The Cassini spacecraft, NASA's mission to investigate the Saturn system, has undergone a system-level thermal balance test program to permit verification of the engineering subsystem thermal designs in the simulated worst-case environments. Additionally, other objectives such as functional checkouts, collection of thermal data for analytical model adjustment, vacuum drying of propellant tanks, and flight temperature transducer verification were also completed. In the interest of cost and schedule, transient off-Sunpoint conditions were not tested. The testing demonstrated that the required system resources such as heater power and radiator area were adequate for all engineering subsystems. The only changes required from the results were related to the operation of some of the subsystems. In the instance of the thruster cluster assemblies, allowable flight temperature limits were exceeded for the assumed operational environment.

The Cassini spacecraft, NASA's mission to investigate the Saturn system, has undergone a system-level thermal balance test program to permit verification of the science instrument thermal designs in the simulated worst-case environments. Additionally, other objectives such as functional checkout, collection of thermal data for analytical model adjustment, and flight temperature transducer verification were also attained. In the interest of cost and schedule, transient off-sunpoint conditions were not tested. The test demonstrated that the required system resources such as heater power and radiator area were adequate. In the instance of the Cosmic Dust Analyzer, allowable flight temperature limits were violated, but this problem is being addressed without a significant impact to system resources or thermal design robustness. Finally, the thermal acceptability of a black Kapton “sock” was demonstrated for the magnetometer boom.

This paper describes the Radioisotope Thermoelectric Generator (RTG) waste heat system and its development, performance, and effectiveness at controlling the temperatures for the propulsion module for the Cassini spacecraft. To explore the Saturn system, the Cassini spacecraft relies on the electrical power from these RTGs, but the large power demand for science and engineering functions severely limits the electrical power available for temperature control. The waste heat system transfers heat radiatively and conductively from each RTG to the propulsion module to maintain temperatures and establish a stable temperature sink to which the rest of the orbiter is thermally anchored.