Search Results

Honda has developed, in collaboration with Hitachi Metals and Daido Steel, two types of low-nickel heat-resistant alloys for exhaust valves which are more cost effective than the conventional nickel alloys. They are NCF4015 that contains approximately 40% nickel and NCF3015 with approximately 30% nickel content. The two types of new alloys were developed based on our unique alloy design concept. Both alloys feature superb high-temperature strength and are capable of maintaining favorable material properties, even after an high-temperature exposure. The NCF4015 is compatible with the conventional Inconel 751 and 60Ni alloys in terms of high-temperature strength. The NCF3015 falls slightly behind the two metals, but overwhelms the 21-4N (SUH35) in high-temperature strength. The exhaust valves made of the two alloys developed have been used for mass production engines.

High viscosity index(HVI) petroleum base stock, with excellent temperature-viscosity characteristics, oxidation resistance, and low-evaporation properties, offers advantages as the base stock for high fuel economy engine oils, particularly because of its low-friction properties in the boundary and/or “E.H.L (Elastohydrodynamic Lubrication)” area due to its rheological characteristics. This research evaluated HVI base stock's low-friction properties. Upgrading the oil from 5W-30 to 5W-20 was also investigated. The friction properties of the HVI base stock were measured by a unit friction platform. The results show a 28% reduction in friction coefficient compared with the conventional, solvent refined oil, which is attributable to the high-pressure viscosity of the base oil.