Search Results

This SAE Recommended Practice provides a method for testing the speed performance of passenger car tires under controlled conditions in the laboratory on a test wheel. This procedure applies to “standard load,” “extra load,” and “T-type high-pressure temporary-use spare” passenger tires.

This procedure provides a method for testing the speed performance of passenger car tires under controlled conditions in the laboratory on a test wheel. (This procedure does not apply to extra load tires or 'T'-type temporary use spare tires.)

This SAE Standard for snap-in tubeless tire valves was developed by the qualified engineers in the tire, valve, and automotive industries. It is based upon sound engineering principles, supported by laboratory testing and field experience, to establish acceptable levels of performance criteria for valves.

This SAE Standard contains recommended test methods for snap-in tubeless tire valves intended for, but not limited to, highway applications. A snap-in valve is a tire valve having a rigid housing adhered to a resilient body designed to retain and seal the valve in the rim hole.

This SAE Standard contains recommended test methods for snap-in tubeless tire valves intended for, but not limited to, highway applications. A snap-in valve is a tire valve having a rigid housing adhered to a resilient body designed to retain and seal the valve in the rim hole.

This SAE Standard for snap-in tubeless tire valves was developed by the qualified engineers in the tire, valve, and automotive industries. It is based upon sound engineering principles, supported by laboratory testing and field experience, to establish acceptable levels of performance criteria for valves.

This standard contains recommended test methods for snap-in tubeless tire valves for use up to 60 psig (415 kPa) intended for, but not limited to, highway applications. A snap-in valve is a tire valve having a rigid housing adhered to a resilient body designed to retain and seal the valve in the rim hole.

This performance document for snap-in tubeless tire valves was developed by qualified engineers in the tire, valve, and automotive industries. It is based upon sound engineering principles, supported by laboratory testing and field experience, to establish acceptable levels of performance criteria for valves for use up to 60 psig (415 kPa).

This document establishes best practices to measure vehicle stopping distance on dry asphalt in a straight path of travel intended for the purpose of publishing stopping distance by manufacturers and media organizations. It is recommended that the test method within be adopted for all vehicles less than 10 000 lb (4536 kg) GVWR. This procedure is typically used with initial speeds of 100 km/h and 60 mph, but other speeds may be used.

This document establishes best practices to measure vehicle stopping distance on dry or wet asphalt in a straight path of travel intended for the purpose of publishing stopping distance by manufacturers and media organizations for vehicles with original equipment tires. It is recommended that the test method within be adopted for all vehicles less than 4536 kg (10000 pounds) GVWR. This procedure is typically used with initial speeds of 100 km/h and 60 mph, but other speeds may be used. Since tires play a significant role in stopping distance, this procedure covers tire types typically used as original equipment on new vehicles including all-season, summer, and all-terrain tires. This document may serve as a procedural guideline for all tire types, but the surface temperature correction formulas in this procedure were developed using all-season tires and may not be applicable to other tire types.

This Recommended Practice describes some basic design requirements and operational procedures associated with equipment for laboratory measurement of tire force and moment properties of the full range of passenger car tires. These properties must be known to establish the tire's contribution to vehicle dynamic performance. Many factors influence laboratory tire force and moment measurements. This Recommended Practice was compiled as a guide for equipment design and test operation so that data from different laboratories can be directly compared and applied to vehicle design and tire selection problems. It is recognized that laboratory measurements define performance in a controlled and idealized situation that may not correspond to conditions encountered in a vehicle's operating environment. Several decades of testing experience in different laboratories indicates, however, that these tests can provide a very useful bench mark for evaluation of tire performance.

This Information Report presents background and rationale for SAE Recommended Practice J1106, Laboratory Testing Machine and Procedures for Measuring the Steady Force and Moment Properties of Passenger Car Tires. The purpose of SAE J1106 is to define standards for equipment design and test procedures so that data from different laboratories can be directly compared. Whereas such standardization is not a requirement for testing associated with tire development, it is necessary in the context of vehicle design and tire selection problems. The basic approach employed in developing SAE J1106 was to consolidate and document existing technology as embodied in equipment and procedures currently employed for routine tire evaluations. Equipment and procedures whose current use is restricted to research applications were not considered. Research experience is discussed in this Information Report, however, to the extent deemed necessary to provide background and rationale for SAE J1106.

This Recommended Practice describes some basic design requirements and operational procedures associated with equipment for laboratory measurement of tire force and moment properties of the full range of passenger car tires. These properties must be known to establish the tire's contribution to vehicle dynamic performance. Many factors influence laboratory tire force and moment measurements. This Recommended Practice was compiled as a guide for equipment design and test operation so that data from different laboratories can be directly compared and applied to vehicle design and tire selection problems. It is recognized that laboratory measurements define performance in a controlled and idealized situation that may not correspond to conditions encountered in a vehicle's operating environment. Several decades of testing experience in different laboratories indicates, however, that these tests can provide a very useful bench mark for evaluation of tire performance.

This Information Report presents background and rationale for SAE Recommended Practice J1106, Laboratory Testing Machine and Procedures for Measuring the Steady Force and Moment Properties of Passenger Car Tires. The purpose of SAE J1106 is to define standards for equipment design and test procedures so that data from different laboratories can be directly compared. Whereas such standardization is not a requirement for testing associated with tire development, it is necessary in the context of vehicle design and tire selection problems. The basic approach employed in developing SAE J1106 was to consolidate and document existing technology as embodied in equipment and procedures currently employed for routine tire evaluations. Equipment and procedures whose current use is restricted to research applications were not considered. Research experience is discussed in this Information Report, however, to the extent deemed necessary to provide background and rationale for SAE J1106.

In recent years the comfort and fatigue of passengers in vehicles has become a major engineering consideration. Among the many factors involved are vibratory and auditory disturbances. Tires participate, among other elements of the vehicle, in exciting vibrations and noises. Furthermore, tires also may generate forces leading to lateral drift of the vehicle. This recommended practice describes the design requirements of equipment for evaluating some of the characteristic excitations of passenger tires causing disturbances in vehicles. The kinds of excitations treated result from nonuniformities in the structure of the tire and have their effect when a vehicle bearing the tire travels on a smooth road. This recommended practice also describes some broad aspects of the use of the equipment and lists precautionary measures that have arisen out of current experience.

In recent years the comfort and fatigue of passengers in vehicles has become a major engineering consideration. Among the many factors involved are vibratory and auditory disturbances. Tires participate, among other elements of the vehicle, in exciting vibrations and noises. Furthermore, tires also may generate forces leading to lateral drift of the vehicle. This recommended practice describes the design requirements of equipment for evaluating some of the characteristic excitations of passenger car and light truck tires which may cause disturbance in vehicles. The kinds of excitations treated result from nonuniformities in the structure of the tire and have their effect when a vehicle bearing the tire travels on a smooth road. This recommended practice also describes some broad aspects of the use of the equipment and lists precautionary measures that have arisen out of current experience.

The comfort and fatigue of vehicle passengers is a major engineering consideration. Among the many factors involved are vibratory and auditory disturbances. Tires participate, among other elements of the vehicle, in exciting vibrations and noises. Furthermore, tires also may generate forces leading to lateral drift of the vehicle. This SAE Recommended Practice describes the design requirements for equipment to evaluate some of the characteristic excitations of passenger car and light truck tires which may cause disturbance in vehicles. The kinds of excitations treated result from nonuniformities in the structure of the tire and have their effect when a vehicle bearing the tire travels on a smooth road. This document also describes some broad aspects of the use of the equipment and lists precautionary measures that have arisen out of current experience. The intention underlying these recommendations is to establish a standardized measurement for use by the engineering community.

The comfort and fatigue of vehicle passengers is a major engineering consideration. Among the many factors involved are vibratory and auditory disturbances. Tires participate, among other elements of the vehicle, in exciting vibrations and noises. Furthermore, tires also may generate forces leading to lateral drift of the vehicle. This SAE Recommended Practice describes the design requirements for equipment to evaluate some of the characteristic excitations of passenger car and light truck tires which may cause disturbance in vehicles. The kinds of excitations treated result from nonuniformities in the structure of the tire and have their effect when a vehicle bearing the tire travels on a smooth road. This document also describes some broad aspects of the use of the equipment and lists precautionary measures that have arisen out of current experience. The intention underlying these recommendations is to establish a standardized measurement for use by the engineering community.

This SAE Recommended Practice describes the determination of tire pull force properties for an uninclined tire (SAE J670e) on a laboratory flat surface tire force and moment machine. It is suitable for accurately determining pull forces and residual aligning moments for passenger and light-truck tires. These properties are important determinants of vehicle trim (See section 2.1.2). They describe steady-state, free-rolling pull effects ascribable to tires. The test method described in this document is suitable for comparative evaluation of tires for research and development purposes. The method is also suitable for modeling when followed carefully.

This SAE Recommended Practice describes the determination of tire pull force properties for an uninclined tire (SAE J670e) on a laboratory flat surface tire force and moment machine. It is suitable for accurately determining pull forces and residual aligning moments for passenger and light-truck tires. These properties are important determinants of vehicle trim (See section 2.1.2). They describe steady-state, free-rolling pull effects ascribable to tires. The test method described in this document is suitable for comparative evaluation of tires for research and development purposes. The method is also suitable for modeling when followed carefully.