Search Results

The flow rate meter based on the Laser Doppler Anemometer (LDA) has been developed to evaluate the fuel injection rate. The flow rate meter is called as LDA flow rate meter. The instantaneous flow rate has been measured at the upstream of an injector. The measured results of instantaneous flow rate are influenced by reflection pressure waves from the end of pipe. The effects of the pressure waves appear as undesirable oscillations in the results of the instantaneous flow rate. A reducing method of the oscillations is proposed as data correction. Corrected data of LDA flow rate meter have similar profiles to the results by the BOSCH-Type injection indicator. The results indicate the instantaneous injection rate can be evaluated by using the LDA flow rate meter.

Regarding measurement of the flow rate of exhaust gas or intake air of engines with several instruments, the pulsating flow in systems causes the error in indicated flow values. Usually a buffer tank is employed for decreasing the pulse. However the tank is rather inconvenient. The authors have developed the named “Surge Tube”, which is composed of a thin silicone rubber film tube having a considerable thermal and mechanical durability. In the conditions near atmospheric pressure, the effective volume as a buffer tank is over 100 times the free real tube volume, without any change in dead volume. The static relations between the inner volume change and the pressure are the most important characteristics, depending on the diameter, thickness, volume, and hardness of the silicone rubber film. The dynamic characteristics of the Surge Tubes are shown as the static pressure configurations at the inlet and outlet of the Surge Tube.