Refine Your Search

Search Results

Author:
Viewing 1 to 4 of 4
Technical Paper

Development of High Performance Heavy-Duty Diesel Engine Oil to Extend Oil Drain Intervals: 5W30 Fully Synthetic Oil Containing MoDTC

2000-06-19
2000-01-1992
In this study, the oxidation stability, soot dispersancy, antiwear performance, and friction-reducing capability of friction modifiers (FMs) were evaluated, and an SAE 5W-30 fully synthetic oil with MoDTC type FMs was developed for heavy-duty diesel engines. In several engine tests, it was confirmed that the developed oil can double the oil drain interval in comparison with API CD SAE 30, even when EGR is applied, and improves the fuel efficiency.
Technical Paper

A Study of Decrease Oil Consumption for NSOR-Two-Ring Package Piston

1991-02-01
910435
Furuhama(1)* proposed the new two ring package consist of a pressure ring and a narrow single-rail oil ring (NSOR) in 1985. Number of studies(2) have been done for the purpose of reducing the oil consumption (OC) in this ring package. However, OC reduction problem has been still remaining to solve as only one serious problem of this ring package. The reasons of a larger OC in the new ring package than the conventional three ring has been hardly understood, considering the OC control ability on second ring in three ring package will not so large since the fact that the oil film thickness is thicker than that of the oil ring. In this study, the mechanism of OC increase in new ring package was found out at last, as a result, OC of new ring package piston was improved up to the same level of conventional three ring package piston.
Technical Paper

Characteristics Of Piston With Pressure Ring And One Narrow Single-Rail Oil Ring

1988-09-01
885131
Proposed at Musashi I.T. Engine research Laboratory in order to realize a smaller size and lower friction piston was a new piston ring parkage, which consisted of one pressure ring and one narrow single-rail oil ring. The new package has tested for two different types of gasoline engines to examine its influences on blow-by, piston temperature, piston friction and oil consumption. Efforts have been also made to improve these characteristics of the package and have resulted in its promising prospects.
X