Criteria

Text:
Display:

Results

Viewing 1 to 30 of 32
CURRENT
2017-10-18
Standard
MS1002_201710
See Table 1.
CURRENT
2017-08-18
Standard
MS1005_201708
ISO 7745 shall be used for providing detailing, operational characteristics, advantages, disadvantages, and factors affecting the choice to be made among fire-resistant fluids. HFAE, HFC, HFDR, HFDU and HETG oils are covered in this specification. HFAS, HFB and HFDS fluids are not addressed.
CURRENT
2013-03-05
Standard
MS1011_201303
The greases have been classified according to the operating conditions under which they are used, because the versatile nature of greases makes it impractical to classify them according to end use. It will therefore be necessary to consult the supplier to be certain that the grease can be used in; for example, rolling bearings or pumped supply systems, and also concerning the compatibility of products (see Remarks in Table 1).
CURRENT
2013-02-11
Standard
MS1000_201302
This index provides an overview of lubricants and symbols for the purpose of assisting the user in the identification of the appropriate product and relevant SAE specification. The aim is to better determine the best lubricant to be used for a particular application. If containers used for shipping lubricants are also to be marked, the same identification and symbols should be used. See also ISO 5169 Machine tools - Presentation of lubrication instructions.
CURRENT
2013-01-28
Standard
MS1003/2_201301
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants. b. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. c. Improve the availability of these lubricants to member companies. d. Provide a plant oriented, user friendly, classification system using common test standards and properties.
2012-11-13
WIP Standard
MS1008
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants. b. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. c. Improve the availability of these lubricants to member companies. d. Provide a plant oriented, user friendly, classification system using common test standards and properties. ISO Standard 6743 - Lubricants, industrial oils and related products (class L) - Classification is the foundation for these documents. Performance characteristics and test procedures are specified. For information, equivalent ISO, DIN, CEN, BSI, ASTM, AFNOR, CETOP, and IP test methods are referenced.
CURRENT
2012-02-29
Standard
MS1003_201202
See Table 1. DAx fluids are mineral oil based, DPx fluids are polyalphaolefin based, and DEx are ester based.
HISTORICAL
2010-12-01
Standard
MS1002_201012
See Table 1.
HISTORICAL
2010-06-21
Standard
MS1005_201006
ISO 7745 shall be used for providing detailing, operational characteristics, advantages, disadvantages, and factors affecting the choice to be made among fire-resistant fluids. HFAE, HFC, HFDR, HFDU and HETG oils are covered in this specification. HFAS, HFB and HFDS fluids are not addressed.
CURRENT
2007-01-12
Standard
MS1008_200701
See Tables 1A and 1B.
HISTORICAL
2004-10-06
Standard
MS1000_200410
This index provides a overview of lubricants and symbols for the purpose of assisting the user in the identification of the appropriate product and relevant SAE specification. The aim is to better determine he best lubricant to be used for a particular application. If containers used for shipping lubricants are also to be marked, the same identification and symbols should be used. See also ISO 5169 Machine tools - Presentation of lubrication instructions.
HISTORICAL
2004-01-07
Standard
MS1003/2_200401
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants. b. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. c. Improve the availability of these lubricants to member companies. d. Provide a plant oriented, user friendly, classification system using common test standards and properties.
HISTORICAL
2002-10-25
Standard
MS1008_200210
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants. b. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. c. Improve the availability of these lubricants to member companies. d. Provide a plant oriented, user friendly, classification system using common test standards and properties. ISO Standard 6743 - Lubricants, industrial oils and related products (class L) - Classification is the foundation for these documents. Performance characteristics and test procedures are specified. For information, equivalent ISO, DIN, CEN, BSI, ASTM, AFNOR, CETOP, and IP test methods are referenced.
HISTORICAL
2002-08-20
Standard
MS1010_200208
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants. b. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. c. Improve the availability of these lubricants to member companies. d. Provide a plant oriented, user friendly, classification system using common test standards and properties. ISO Standard 6743 - Lubricants, industrial oils and related products (class L) - Classification is the foundation for these documents. a. Performance characteristics and test procedures are specified. b. For information, equivalent ISO, DIN, CEN, BSI, ASTM, AFNOR, CETOP, and IP test methods are referenced.
HISTORICAL
2002-07-25
Standard
MS1009_200207
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: Define minimum performance requirements for industrial lubricants. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. Improve the availability of these lubricants to member companies. Provide a plant oriented, user friendly, classification system using common test standards and properties. ISO Standard 6743 - Lubricants, industrial oils and related products (class L) - Classification is the foundation for these documents. Performance characteristics and test procedures are specified. For information, equivalent ISO, DIN, CEN, BSI, ASTM, AFNOR, CETOP, and IP test methods are referenced.
HISTORICAL
2002-05-17
Standard
MS1001_200205
Properties for type AY oils are not addressed in this document.
HISTORICAL
2002-01-04
Standard
MS1011_200201
The greases have been classified according to the operating conditions under which they are used, because the versatile nature of greases makes it impractical to classify them according to end use. It will therefore be necessary to consult the supplier to be certain that the grease can be used in, for example, rolling bearings or pumped supply systems, and also concerning the compatibility of products (see Remarks in Table 1). NOTE--In this classification, a grease cannot have more than one symbol. This symbol should correspond to the most severe conditions of temperature, water contamination and load in which the grease can be used.
HISTORICAL
2001-07-30
Standard
MS1002_200107
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non- production, lubricant performance specifications. The purpose of this voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants, where tests are available. b. Provide lubricant suppliers with performance targets for key industrial lubricants. c. Promote the availability of these lubricants to member companies and others who may wish to use these specifications. d. Provide a user friendly classification system using common test standards and properties. ISO Standard 6743, Lubricants, industrial oils and related products (class L) - Classification, is the foundation for these documents. a. Performance characteristics and test procedures are specified. b. For information, equivalent ISO, DIN, CEN, BSI, ASTM, AFNOR, CETOP, and IP test methods are referenced.
HISTORICAL
2001-07-18
Standard
MS1006_200107
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non- production, lubricant performance specifications. The purpose of this voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants, where tests are available. b. Provide lubricant suppliers with performance targets for key industrial lubricants. c. Promote the availability of these lubricants to member companies and others who may wish to use these specifications. d. Provide a user friendly classification system using common test standards and properties. ISO Standard 6743, Lubricants, industrial oils and related products (class L) - Classification, is the foundation for these documents. a. Performance characteristics and test procedures are specified. b. For information, equivalent ISO, DIN, CEN, BSI, ASTM, AFNOR, CETOP, and IP test methods are referenced.
HISTORICAL
2001-06-13
Standard
MS1005_200106
ISO 7745 shall be used for providing detailing, operational characteristics, advantages, disadvantages, and factors affecting the choice to be made among fire-resistant fluids.
HISTORICAL
2001-05-30
Standard
MS1007_200105
The Society of Automotive Engineers (SAE) Industrial Lubricants Committee has developed a number of industrial, non-production lubricant performance specifications. The purpose of these voluntary SAE specifications is to: a. Define minimum performance requirements for industrial lubricants. b. Provide lubricant suppliers with performance targets for a minimum number of key industrial lubricants. Improve the availability of these lubricants to member companies. Provide a plant oriented, user friendly, classification system using common test standards and properties.
Viewing 1 to 30 of 32