Search Results

Standard

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

2016-06-30

HISTORICAL

J1095_201606

This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.500 to 13.189 in). It is up to each hub and/or wheel for demountable rims manufacturer to determine what test method, accelerated load factor and cycle life requirements are applicable to obtain satisfactory service life in a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters to obtain satisfactory service life.

Standard

HUB FATIGUE TEST PROCEDURES

1986-03-01

HISTORICAL

J1095_198603

This Recommended Practice provides uniform laboratory procedures for fatigue testing of hubs intended for highway use on trucks, buses, truck-trailers, and multi-purpose passenger vehicles having bolt circles from 6.5 - 13-3/16 in (165.1-335 mm) diameters. The tests described in this Recommended Practice are not to be construed as the only tests required or permitted to assure that a hub will perform satisfactorily for its intended use.

Standard

HUB FATIGUE TEST PROCEDURES

1982-06-01

HISTORICAL

J1095_198206

This recommended practice provides uniform laboratory procedures for fatigue testing of hubs intended for highway use on trucks, buses, truck-trailers, and multi-purpose passenger vehicles having bolt circles from 6.5 − 13 3 16 in (165.1–335 mm) diameters. The tests described in this recommended practice are not to be construed as the only tests required or permitted to assure that a hub will perform satisfactorily for its intended use.

Standard

IDENTIFICATION OF TRUCK, TRAILER, AND BUS WHEEL SEALS AND ASSOCIATED PACKAGING

1994-10-01

HISTORICAL

J2224_199410

This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging.

Standard

Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging

2008-07-17

HISTORICAL

J2224_200807

This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging.

Standard

Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging

2015-11-19

CURRENT

J2224_201511

This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging. 1.1 Purpose The purpose of this document is to provide users of truck, trailer, and bus wheel seals a means of identifying the suppliers of all such components by use of the symbology utilized by the suppliers on their components and packaging.

Standard

Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging

2002-05-31

HISTORICAL

J2224_200205

This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging.

Standard

Inboard Mounted Disc Brake Rotor/Disc Wheel Hub Interface Dimensions - Commercial Vehicles

2012-05-29

HISTORICAL

J2696_201205

This SAE Recommended Practice establishes dimensions and tolerances for the interface between inboard mounted disc brake rotors and disc wheel hubs. The geometric features described in this document are shown at true position. This document is intended for inboard mounted disc brake rotors and disc wheel hubs for Class 5, 6, 7, and 8 commercial vehicles. Special and less common applications are not covered.

Standard

Inboard Mounted Disc Brake Rotor/Disc Wheel Hub Interface Dimensions - Commercial Vehicles

2019-09-03

HISTORICAL

J2696_201909

This SAE Recommended Practice establishes dimensions and tolerances for the interface between inboard mounted disc brake rotors and disc wheel hubs. This document is intended for inboard mounted disc brake rotors and disc wheel hubs for Class 5, 6, 7, and 8 commercial vehicles. Special and less-common applications are not covered.

Standard

Inboard Mounted Disc Brake Rotor/Disc Wheel Hub Interface Dimensions - Commercial Vehicles

2023-06-27

CURRENT

J2696_202306

This SAE Recommended Practice establishes dimensions and tolerances for the interface between inboard mounted disc brake rotors and disc wheel hubs. This document is intended for inboard mounted disc brake rotors and disc wheel hubs for Class 5, 6, 7, and 8 commercial vehicles. Special and less-common applications are not covered.

Standard

LABELING — DISC WHEELS AND DEMOUNTABLE RIMS — TRUCKS

1970-10-01

HISTORICAL

J179A_197010

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

LABELING — DISC WHEELS AND DEMOUNTABLE RIMS — TRUCKS

1970-06-01

HISTORICAL

J179_197006

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications. Refer to SAE J393.

Standard

LABELING—DISC WHEEL AND DEMOUNTABLE RIMS—TRUCKS

1984-07-01

HISTORICAL

J179_198407

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Labeling - Disc Wheels and Demountable Rims - Trucks

2011-04-14

HISTORICAL

J179_201104

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Labeling - Disc Wheels and Demountable Rims - Trucks

2012-09-27

HISTORICAL

J179_201209

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Labeling - Disc Wheels and Demountable Rims - Trucks

2013-05-23

CURRENT

J179_201305

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Labeling—Disc Wheels and Demountable Rims—Trucks

2007-02-21

HISTORICAL

J179_200702

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

Labeling—Disc Wheels and Demountable Rims—Trucks

2001-07-31

HISTORICAL

J179_200107

This SAE Recommended Practice establishes uniform minimum labeling for disc wheels and demountable rims used in truck, bus, and trailer applications.

Standard

NOMENCLATURE--WHEELS, HUBS, AND RIMS FOR COMMERCIAL VEHICLES

1984-01-01

HISTORICAL

J393_198401

This SAE Recommended Practice establishes uniform engineering nomenclature for wheels, rims, and their components used in truck, bus, and trailer applications. This nomenclature and accompanying drawings are intended to define fundamental truck wheel, hub, and rim terms rather than to provide a comprehensive tabulation of all wheel, hub, and rim designs.

Standard

NOMENCLATURE—WHEELS AND RIMS—TRUCKS

1969-06-01

HISTORICAL

J393_196906

This SAE Recommended Practice establishes uniform engineering nomenclature for wheels, rims, and their components used in truck, bus, and trailer applications. This nomenclature and accompanying drawings are intended to define fundamental truck wheel, hub, and rim terms rather than to provide a comprehensive tabulation of all wheel hub and rim designs.