Refine Your Search

Date

Date

Topic

Topic

Search Results

Viewing 1 to 20 of 28
12Next >Last >>
Sort by title
Standard

BYSTANDER SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1985-03-01
HISTORICAL
J1175_198503
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the bystander sound level of engine powered equipment under 15 kW (20 bhp) typical of their normal operation. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories and buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the bystander sound level on similar equipment powered by electricity or other power sources.
Standard

BYSTANDER SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1977-10-01
HISTORICAL
J1175_197710
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the bystander sound level of engine powered equipment under 15 kW (20 bhp) typical of their normal operation. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories and buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the bystander sound level on similar equipment powered by electricity or other power sources.
Standard

Bystander Sound Level Measurement Procedure for Small Engine Powered Equipment
2012-05-11
CURRENT
J1175_201205
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the bystandard sound level of engine powered equipment under 15 kW (20 bhp) typical of their normal operation. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories and buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. The SAE Recommended Practice may also be used when measuring the bystander sound level on similar equipment powered by electricity or other power sources.
Standard

MOUNTING FLANGES AND POWER TAKE-OFF SHAFTS FOR SMALL ENGINES
1965-07-01
HISTORICAL
J609_196507
Mounting flanges and power take-off shafts are divided into two main categories: those for horizontal crankshaft engines and those for vertical crankshaft engines. This recommended practice applies to engines of less than 6-bhp rating, of both 4 cycle and 2 cycle designs.
Standard

OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1977-10-01
HISTORICAL
J1174_197710
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the operator ear sound level for engine powered equipment under 15 kW (20 bhp). The sound levels obtained by using this procedure are representative of the sound levels generated by the equipment under typical operating conditions. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories or buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the operator ear sound level of similar equipment powered by electricity or other power sources.
Standard

OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT
1985-03-01
HISTORICAL
J1174_198503
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the operator ear sound level for engine powered equipment under 15 kW (20 bhp). The sound levels obtained by using this procedure are representative of the sound levels generated by the equipment under typical operating conditions. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories or buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover chain saws. This SAE Recommended Practice may also be used when measuring the operator ear sound level of similar equipment powered by electricity or other power sources.
Standard

Operator Ear Sound Level Measurement Procedure for Small Engine Powered Equipment
2015-04-30
CURRENT
J1174_201504
This SAE Recommended Practice establishes the instrumentation and procedure to be used in measuring the operator ear sound level for engine powered equipment under 30 kW (40 bhp). The sound levels obtained by using this procedure are representative of the sound levels generated by the equipment under typical operating conditions. It is intended to include equipment such as lawn mowers, snow blowers, and tillers. It is not intended to include equipment designed primarily for operation on highways or within factories or buildings, or vehicles such as motorcycles, snowmobiles, and pleasure motorboats that are covered by other SAE Standards or Recommended Practices. This procedure does not cover handheld equipment such as chainsaws, leaf blowers, and trimmers. This SAE Recommended Practice may also be used when measuring the operator ear sound level of similar equipment powered by electricity or other power sources.
Standard

Procedure for Mapping Fuel Consumption for small spark ignited engines
2017-03-22
WIP
J3139
The purpose of this SAE Standard is to provide a standardized test procedure for measuring the fuel consumption of spark ignited engines in the range of 225-999cc used in the consumer and commercial turf industry. The load points and associated fuel consumption rates will be measured as the engine operates on the engine speed governor, reflecting how the user will operate the equipment. The fuel consumption calculated in gallons of useage per hour will be derived from a specified engine speed and load map to be communicated universally to end users.
Standard

SMALL ENGINE POWER RATING PROCEDURE
1989-06-01
HISTORICAL
J1940_198906
This standard is applicable to small spark ignition and diesel engines, commonly operated outdoors, powering lawn and garden, construction, and general utility equipment. It is not intended to cover engines powering boats, chainsaws or weedeaters.
Standard

SMALL SPARK IGNITION ENGINE TEST CODE
1974-06-01
HISTORICAL
J607A_197406
The purpose of this code is to provide a uniform means of comparing small gasoline engines. It is not intended as a laboratory manual. The code is considered the nearest present-day practical approach. Governor characteristics are considered part of the end item specification.
Standard

Small Diameter Fuel Line Permeation Test Procedure
2013-01-14
CURRENT
J2996_201301
This SAE Recommended Practice is intended for the determination of the losses of hydrocarbon fluids by permeation through small diameter fuel hose typically 4.75mm ID or less and typically used on Small Off-Road Engines (SORE) less than 19 kW as regulated under 40 CFR Part 1054.
Standard

Small Engine Power and Torque Rating Procedure
2002-05-29
HISTORICAL
J1940_200205
This SAE Standard is applicable to small spark and compression ignition engines, having a maximum of 1.0 L sweep volume displacement, which are commonly operated outdoors, powering lawn and garden, construction, and general utility equipment. It is not intended to cover engines powering boats.
12Next >Last >>
X