Search Results

Product Design is a process of creating new product by an organization or business entity for its customer. Being part of a stage in a product life cycle, it is very important that the highest level of effort is being put in the stage. The Design for Six Sigma (DFSS) methodology consists of a collection of tools, needs-gathering, engineering, statistical methods, and best practices that find use in product development. DFSS has the objective of determining the needs of customers and the business, and driving those needs into the product solution so created. In this paper the DFSS methodology is employed to develop the optimal solution to enhance sound transmission loss in a vehicle front of dash pass-through. An integrated approach using acoustic holography and beamforming Noise Source Identification (NSI) techniques is presented as a manner to improve sound insulation during vehicle development.

The control of noise and vibrations using conventional damping materials is typically associated to mass penalties in a vehicle. A lightweight alternative employs piezoceramic materials connected in series to a resistor and an inductor (R-L circuit) to perform as mechanical vibration absorber, called piezoelectric resonator. In this paper, piezoelectric resonators are designed to attenuate vibration in a vehicle panel. The choice of design parameters, such as correct placement for the piezoelectric patches and the optimal electrical circuit values, is assisted by Finite Element simulation (FE) and theoretical analysis. Measurements of Sound Transmission Loss (STL) and modal analyses are conducted to demonstrate the efficiency of the proposed technique when compared to a conventional damping material.

Currently, acoustic holography and beamforming are consolidated Noise Source Identification (NSI) techniques with expanding applications. These two microphone array based techniques can provide detailed sound field visualization. Even in enclosed space, such as a vehicle cabin, the sound field can be visualized using Spherical Harmonics Beamforming (SHB). Also, sound radiation from geometrically complex surfaces can be captured with conformal mapping using Statistically Optimized Near-field Acoustic Holography (SONAH). In this paper, an integrated approach using both techniques is presented as a manner to improve sound insulation during a vehicle development. Both vehicle and component level measurements are employed in order to identify the dominant sound transmission paths and add the appropriate acoustic treatments. It is shown that spherical beamforming and conformal mapping are powerful tools which expedite troubleshooting and allow vehicle acoustic content optimization.

Currently, the use of numerical and analytical tools during a vehicle development is extensive in the automotive industry. This assures that the required performance levels can be achieved from the early stages of development. However, there are some aspects of the vibro-acoustic performance of a vehicle that are rarely assessed through numerical or analytical analysis. An example is the modeling of sound transmission through vehicle sealing systems. In this case, most of the investigations have been done experimentally, and the analytical models available are not sufficiently accurate. In this paper, the modeling of the sound transmission through a vehicle door seal is presented. The study is an extension of a previous work in which the applicability of the Hybrid FE-SEA method was demonstrated for predicting the TL of sealing elements.

During the last decades, the application of noise control treatments in vehicles has targeted the main noise transmission paths to interior noise. These paths include vehicle body panels such as dash panel, doors and floor. Many improvements have been achieved on these areas, and, as a consequence, other transmission paths once thought as secondary became relevant. This is the case of the sound transmission through door seals and others sealing elements at mid and high frequencies. In this paper, the interest lies on the prediction of the transmission loss of door seals. A full nonlinear deformation/contact analysis is used to estimate the deformed geometry of a door seal in real conditions. The geometry is then used in a vibro-acoustic analysis to predict the in-situ transmission loss of the seal using a local Hybrid FE-SEA model. The channel between the door and the car structure where the seal is located is also included in the analysis.