Search Results

Standard

HOSE PUSH-ON FITTINGS

1978-05-01

HISTORICAL

J1231_197805

This standard covers complete general and dimensional specifications for hose push-on fittings. These fittings are intended for general applications in low pressure automotive and hydraulic systems on automotive, industrial, and commercial products. The fittings shown in Figs. 1–3 and Table 2 are intended for use with low pressure hose and shall be retained by hose clamps as specified in SAE J536.

Standard

HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4 BOLT SPLIT FLANGE TYPE

1965-07-01

HISTORICAL

J518B_196507

This standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to 4-bolt split flange type tube, pipe, and hose connections with appropriate references to the “O” ring seals and attaching components used in their assembly. Also included are recommended port dimensions and port design considerations. The flanged heads specified are incorporated into fittings having suitable means for attachment to tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections. Flanged heads shall be as specified in Fig. 3 and Table 1. Split flange clamp halves shall be as specified in Fig. 4 and Table 1. Port dimensions and spacing shall be as specified in Fig. 5 and Table 2.

Standard

HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-BOLT SPLIT FLANGE TYPE

1987-12-01

HISTORICAL

J518_198712

This standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to 4-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. Also included are recommended port dimensions and port design considerations. The flanged heads specified are incorporated into fittings having suitable means for attachment to tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections. Flanged heads shall be as specified in Fig. 3 and Table 1. Split flange clamp halves shall be as specified in Fig. 4 and Table 1. Port dimensions and spacing shall be as specified in Fig. 5 and Table 2.

Standard

HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-BOLT SPLIT FLANGE TYPE

1972-05-01

HISTORICAL

J518C_197205

This standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to 4-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. Also included are recommended port dimensions and port design considerations. The flanged heads specified are incorporated into fittings having suitable means for attachment to tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections. Flanged heads shall be as specified in Fig. 3 and Table 1. Split flange clamp halves shall be as specified in Fig. 4 and Table 1. Port dimensions and spacing shall be as specified in Fig. 5 and Table 2.

Standard

HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE

1991-04-01

HISTORICAL

J518_199104

This SAE Standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to four-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. (See Figures 1 and 2.) Also included are recommended port dimensions and port design considerations. The flanged heads specified are incorporated into fittings having suitable means for attachment to tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections. Flanged heads shall be as specified in Figure 3 and Table 1. Split flange clamp halves shall be as specified in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table 2.

Standard

HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE

1993-06-01

HISTORICAL

J518_199306

This SAE Standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to four-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. (See Figures 1 and 2.) Also included are recommended port dimensions and port design considerations. The flanged heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections. THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J518 HOSE CONNECTIONS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES. Flanged heads shall be as specified in Figure 3 and Table 1.

Standard

HYDRAULIC HOSE

1993-06-01

HISTORICAL

J517_199306

This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. (See Table 1.) This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user. The rated working pressure of a hose assembly comprising SAE J517 hose and hose fitting end connections per SAE J516, J518, J1453, etc., shall not exceed the lower of the respective SAE working pressure rated values.

Standard

HYDRAULIC HOSE

1991-04-01

HISTORICAL

J517_199104

This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. (See Table 1.) This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user.

Standard

HYDRAULIC HOSE

1995-06-01

HISTORICAL

J517_199506

This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. (See Table 1.) This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user. The rated working pressure of a hose assembly comprising SAE J517 hose and hose fitting end connections per SAE J516, J518, J1453, etc., shall not exceed the lower of the respective SAE working pressure rated values.

Standard

HYDRAULIC HOSE

1994-06-01

HISTORICAL

J517_199406

This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. (See Table 1.) This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user. The rated working pressure of a hose assembly comprising SAE J517 hose and hose fitting end connections per SAE J516, J518, J1453, etc., shall not exceed the lower of the respective SAE working pressure rated values.

Standard

HYDRAULIC HOSE

1997-05-01

HISTORICAL

J517_199705

This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. (See Table 1.) This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user. The rated working pressure of a hose assembly comprising SAE J517 hose and hose fitting end connections per SAE J516, J518, J1453, etc., shall not exceed the lower of the respective SAE working pressure rated values.

Standard

HYDRAULIC HOSE

1996-06-01

HISTORICAL

J517_199606

This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document. (See Table 1.) This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user. The rated working pressure of a hose assembly comprising SAE J517 hose and hose fitting end connections per SAE J516, J518, J1453, etc., shall not exceed the lower of the respective SAE working pressure rated values.

Standard

HYDRAULIC HOSE

1980-06-01

HISTORICAL

J517_198006

This standard covers general, dimensional, and performance specifications for several varieties of hose intended for general application in hydraulic systems on construction and industrial equipment and commercial products. These general specifications are common to and shall supplement the detailed specifications for the SAE 100R1, SAE 100R2, SAE 100R3, SAE 100R4, SAE 100R5, SAE 100R6, SAE 100R7, SAE 100R8, SAE 100R9, SAE 100R10, SAE 100R11, and SAE 100R12 hydraulic hoses set forth in the following sections.

Standard

HYDRAULIC HOSE

1980-08-01

HISTORICAL

J517_198008

This standard covers general, dimensional, and performance specifications for several varieties of hose intended for general application in hydraulic systems on construction and industrial equipment and commercial products. These general specifications are common to and shall supplement the detailed specifications for the SAE 100R1, SAE 100R2, SAE 100R3, SAE 100R4, SAE 100R5, SAE 100R6, SAE 100R7, SAE 100R8, SAE 100R9, SAE 100R10, SAE 100R11, and SAE 100R12 hydraulic hoses set forth in the following sections.

Standard

HYDRAULIC HOSE

1984-05-01

HISTORICAL

J517_198405

This standard covers general, dimensional, and performance specifications for several varieties of hose intended for general application in hydraulic systems on construction and industrial equipment and commercial products. These general specifications are common to and shall supplement the detailed specifications for the SAE 100R1, SAE 100R2, SAE 100R3, SAE 100R4, SAE 100R5, SAE 100R6, SAE 100R7, SAE 100R8, SAE 100R9, SAE 100RI0, SAE 100R11, and SAE 100R12 hydraulic hoses set forth in the following sections.

Standard

HYDRAULIC HOSE

1985-06-01

HISTORICAL

J517_198506

This standard covers general, dimensional, and performance specifications for several varieties of hose intended for general application in hydraulic systems on construction and industrial equipment and commercial products. These general specifications are common to and shall supplement the detailed specifications for the SAE 100R1, SAE 100R2, SAE 100R3, SAE 100R4, SAE 100R5, SAE 100R6, SAE 100R7, SAE 100R8, SAE 100R9, SAE 100R10, SAE 100R11, and SAE 100R12 hydraulic hoses set forth in the following sections.

Standard

HYDRAULIC HOSE

1986-11-01

HISTORICAL

J517_198611

This standard covers general, dimensional, and performance specifications for several varieties of hose intended for general application in hydraulic systems on construction and industrial equipment and commercial products. These general specifications are common to and shall supplement the detailed specifications for the SAE 100R1, SAE 100R2, SAE 100R3, SAE 100R4, SAE 100R5, SAE 100R6, SAE 100R7, SAE 100R8, SAE 100R9, SAE 100R10, SAE 100R11, and SAE 100R12 hydraulic hoses set forth in the following sections.

Standard

HYDRAULIC HOSE

1987-06-01

HISTORICAL

J517_198706

This standard covers general, dimensional, and performance specifications for several varieties of hose intended for general application in hydraulic systems on construction and industrial equipment and commercial products. These general specifications are common to and shall supplement the detailed specifications for the SAE 100R1, SAE 100R2, SAE 100R3, SAE 100R4, SAE 100R5, SAE 100R6, SAE 100R7, SAE 100R8, SAE 100R9, SAE 100R10, SAE 100R11, SAE 100R12, SAE 100R13, and SAE 100R14 hydraulic hoses set forth in the following sections.

Standard

HYDRAULIC HOSE

1988-03-01

HISTORICAL

J517_198803

This standard covers general, dimensional, and performance specifications for several varieties of hose intended for general application in hydraulic systems on construction and industrial equipment and commercial products. These general specifications are common to and shall supplement the detailed specifications for the SAE 100R1, SAE 100R2, SAE 100R3, SAE 100R4, SAE 100R5, SAE 100R6, SAE 100R7, SAE 100R8, SAE 100R9, SAE 100R10, SAE 100R11, SAE 100R12, SAE 100R13, and SAE 100R14 hydraulic hoses set forth in the following sections.

Standard

HYDRAULIC HOSE

1989-05-01

HISTORICAL

J517_198905

This standard provides general, dimensional and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment. The general specifications contained in sections 1 through 11 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this standard. This standard shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user.