Search Results

Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS

1997-04-01

HISTORICAL

J121_199704

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.

Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS

1996-08-01

HISTORICAL

J121_199608

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.

Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS

1996-05-01

HISTORICAL

J121_199605

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.

Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS

1994-05-01

HISTORICAL

J121_199405

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.

Standard

DRYSEAL PIPE THREADS

1961-06-01

HISTORICAL

J476A_196106

The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material. The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.

Standard

Decarburization in Hardened and Tempered Metric Threaded Fasteners

2013-01-02

CURRENT

J121M_201301

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.

Standard

Decarburization in Hardened and Tempered Unified Threaded Fasteners

2013-01-02

CURRENT

J121_201301

This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.

Standard

Dryseal Pipe Threads

2013-02-01

CURRENT

J476_201302

The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material. The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.

Standard

Dryseal Pipe Threads

1961-06-01

HISTORICAL

J476_196106

The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material. The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.

Standard

FLANGED 12-POINT SCREWS

1998-05-01

HISTORICAL

J58_199805

Included in this SAE Standard are the detailed general and dimensional specifications applicable to flanged 12-point screws recognized as SAE Standard and intended for general use in automotive and other ground-based vehicles and industrial equipment. Also included is Appendix A, covering runout sleeve gages and gaging. The inclusion of dimensional data in this standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult manufacturers concerning availability of product.

Standard

Flanged 12-Point Screws

2020-08-27

WIP

J58

Included in this SAE Standard are the detailed general and dimensional specifications applicable to flanged 12-point screws recognized as SAE Standard and intended for general use in automotive and other ground-based vehicles and industrial equipment. The inclusion of dimensional data in this standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult manufacturers concerning availability of product.

Standard

Flanged 12-Point Screws

2015-02-26

CURRENT

J58_201502

Included in this SAE Standard are the detailed general and dimensional specifications applicable to flanged 12-point screws recognized as SAE Standard and intended for general use in automotive and other ground-based vehicles and industrial equipment. The inclusion of dimensional data in this standard is not intended to imply that all of the products described are stock production sizes. Consumers should consult manufacturers concerning availability of product.

Standard

GROOVED STRAIGHT PINS

1964-06-01

HISTORICAL

J494_196406

Standard

Grooved Straight Pins

2004-05-12

CURRENT

J494_200405

Material-Cold drawn SAE 1112 or 1113 steel, alloy steel or copper alloy as specified by purchaser. Unless otherwise specified, steel pins shall have a flash plate of cadmium or zinc for protection of pins in transit or storage. Grooved Straight Pins must be free from burrs and all other defects that might affect their use and serviceability.

Standard

Guide for Rivet Selection and Design Consideration

2013-04-16

HISTORICAL

J492_201304

This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.

Standard

Guide for Rivet Selection and Design Consideration

2005-06-30

HISTORICAL

J492_200506

This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.

Standard

Guide for Rivet Selection and Design Consideration

2016-11-23

CURRENT

J492_201611

This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.

Standard

HEXAGON HIGH NUTS

1998-05-01

HISTORICAL

J482_199805

Included herein are the detailed general and dimensional specifications applicable to high hex nuts. All general specifications not shown here shall conform with those applicable to hex thick nuts and hex thick slotted nuts appearing in ASME B18.2.2. High hex nuts are primarily intended for use in automotive and other ground-based vehicles and industrial equipment where a long length of hexagon is required for wrenching purposes.

Standard

HI-HEAD FINISHED HEX BOLTS

1969-06-01

HISTORICAL

J871_196906

Included herein are the detailed general and dimensional specifications applicable to hi-head finished hex bolts. All general specifications and dimensions not shown shall conform to those applicable to finished hex bolts in Table 4 of SAE J104. Hi-head finished hex bolts arc primarily intended for use in the heavy construction and industrial equipment industry. The increase in head height over that of the finished hex bolt assures good wrenchability where frequent servicing is necessary, where high torquing is a requirement, or where wear on the bolt head is a problem.

Standard

HI-HEAD FINISHED HEXAGON BOLTS

1963-06-01

HISTORICAL

J871_196306