Search Results

Standard

Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment

2022-02-24

WIP

J2520

This SAE Standard applies to directional drilling electronics and tracking equipment of the following types: a. Tracking Transmitter b. Tracking Receiver c. Telemetry Device d. Remote Display This type of tracking equipment is typically used with Horizontal Earthboring Machines as defined in SAE J2022. The purpose of this document is to define common terms and commercial specifications associated with tracking equipment used in the horizontal earthboring industry.

Standard

Guidelines and Procedures for Directional Drilling Tracking Operators

2022-02-24

WIP

J2519

These general guidelines and precautions apply to personnel operating directional drilling tracking equipment when used with Horizontal Earthboring Machines as defined in SAE J2022.

Standard

Hazard Reduction for Horizontal Earthboring Machines

2022-02-24

WIP

J2305

This SAE standard applies to horizontal earthboring machines (SAE J2022) of the following types: a. Auger boring machines; b. Rod pushers; c. Rotary rod machines; d. Impact machines. This document does not apply to specialized horizontal directional drills, mining machines, conveyors, tunnel boring machines, pipe jacking systems, micro tunnelers, or well drilling machines.

Standard

Directional Drilling Planning and Mapping Nomenclature

2022-02-24

WIP

J2583

This SAE Standard applies to planning and mapping various types of information associated with directional boring/drilling machines. This type of planning and mapping information is typically used with horizontal earthboring machines as defined by SAE J2022.

Standard

Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines

2022-02-24

WIP

J2022

This SAE Standard applies to horizontal earthboring machines of the following types: a. Auger Boring Machines b. Rod Pushers c. Rotary Rod Machines d. Impact Machines e. Directional Boring/Drilling Machines The illustrations used are for classification and are not intended to resemble a particular machine. Only basic working dimensions are given. They may be supplemented by the machine manufacturer. This document is based on existing commercial horizontal earthboring machines. This document does not apply to specialized mining machinery in SAE J1116, conveyors, tunnel boring machines, pipe jacking systems, and microtunnelers.

Standard

Vacuum Excavation and Sewer Cleaning Equipment - Safety Requirements

2021-09-21

CURRENT

J3107_202109

This SAE Standard provides safety requirements for vacuum excavation and sewer cleaning equipment. This document is not intended to cover equipment addressed by other on-road federal, state, and local regulations. Truck-mounted or trailer-mounted vehicles are required to meet local or regional on-road requirements, as applicable.

Standard

Vacuum Excavation and Sewer Cleaning Equipment - Safety Requirements

2020-07-17

HISTORICAL

J3107_202007

This SAE standard provides safety requirements for vacuum excavation and sewer cleaning equipment. This document is not intended to cover equipment addressed by other on-road federal, state, and local regulations. Truck-mounted or trailer-mounted vehicles are required to meet local or regional on-road requirements, as applicable.

Standard

Vacuum Excavation and Sewer Cleaning Equipment Classification and Nomenclature

2019-11-19

CURRENT

J3106_201911

This document lists common terminology for vacuum excavation and sewer cleaning equipment, including component names and specific work completed by these machines. This document also illustrates some common types of equipment.

Standard

Hazard Reduction for Horizontal Earthboring Machines

2017-01-18

CURRENT

J2305_201701

This SAE standard applies to horizontal earthboring machines (SAE J2022) of the following types: a Auger boring machines; b Rod pushers; c Rotary rod machines; d Impact machines. This document does not apply to specialized horizontal directional drills, mining machines, conveyors, tunnel boring machines, pipe jacking systems, micro tunnelers, or well drilling machines.

Standard

Operator Controls - Horizontal Earthboring Machines

2015-06-19

CURRENT

J1611_201506

This SAE Standard applies to horizontal earthboring machines of the following types: a. Auger Machines b. Pipe Pushers c. Rotary Rod Machines d. Impact Machines e. Horizontal Directional Drilling Machines Additional information on machines of this type may be found in SAE J2022 and SAE J2305. This document does not apply to specialized mining machinery such as conveyors, tunnel-boring machines, pipe-jacking systems, and microtunnelers.

Standard

Guidelines and Procedures for Directional Drilling Tracking Operators

2013-03-26

CURRENT

J2519_201303

These general guidelines and precautions apply to personnel operating directional drilling tracking equipment when used with Horizontal Earthboring Machines as defined in SAE J2022.

Standard

Directional Drilling Planning and Mapping Nomenclature

2013-02-13

CURRENT

J2583_201302

This SAE Standard applies to planning and mapping various types of information associated with directional boring/drilling machines. This type of planning and mapping information is typically used with horizontal earthboring machines as defined by SAE J2022.

Standard

Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment

2013-01-02

CURRENT

J2520_201301

This SAE Standard applies to directional drilling electronics and tracking equipment of the following types: - Tracking Transmitter - Tracking Receiver - Telemetry Device - Remote Display This type of tracking equipment is typically used with Horizontal Earthboring Machines as defined in SAE J2022.

Standard

Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines

2012-07-31

CURRENT

J2022_201207

This SAE Standard applies to horizontal earthboring machines of the following types: a Auger Boring Machines b Rod Pushers c Rotary Rod Machines d Impact Machines e Directional Boring/Drilling Machines The illustrations used are for classification and are not intended to resemble a particular machine. Only basic working dimensions are given. They may be supplemented by the machine manufacturer. This document is based on existing commercial horizontal earthboring machines. This document does not apply to specialized mining machinery in SAE J1116, conveyors, tunnel boring machines, pipe jacking systems, and microtunnelers.

Standard

Hazard Reduction for Horizontal Earthboring Machines

2011-08-04

HISTORICAL

J2305_201108

This SAE standard applies to horizontal earthboring machines (SAE J2022) of the following types: a Auger boring machines; b Rod pushers; c Rotary rod machines; d Impact machines; e Horizontal Directional Drilling machines. This document does not apply to specialized mining machines, conveyors, tunnel boring machines, pipe jacking systems, micro tunnelers, or well drilling machines.

Standard

Operator Controls—Horizontal Earthboring Machines

2009-03-04

HISTORICAL

J1611_200903

This SAE Standard applies to horizontal earthboring machines of the following types: a Auger Machines b Pipe Pushers c Rotary Rod Machines d Impact Machines e Horizontal Directional Drilling Machines Additional information on machines of this type may be found in SAE J2022 and SAE J2305. This document does not apply to specialized mining machinery such as conveyors, tunnel-boring machines, pipe-jacking systems, and microtunnelers.

Standard

Classification, Nomenclature, and Specification Definitions for Directional Drilling Tracking Equipment

2007-08-30

HISTORICAL

J2520_200708

This SAE Standard applies to directional drilling electronics and tracking equipment of the following types: a Tracking Transmitter b Tracking Receiver c Telemetry Device d Remote Display This type of tracking equipment is typically used with Horizontal Earthboring Machines as defined in SAE J2022.

Standard

Guidelines and Procedures for Directional Drilling Tracking Operators

2007-08-30

HISTORICAL

J2519_200708

These general guidelines and precautions apply to personnel operating directional drilling tracking equipment when used with Horizontal Earthboring Machines as defined in SAE J2022.

Standard

Directional Drilling Planning and Mapping Nomenclature

2007-08-30

HISTORICAL

J2583_200708

This SAE Standard applies to planning and mapping various types of information associated with directional boring/drilling machines. This type of planning and mapping information is typically used with horizontal earthboring machines as defined by SAE J2022.

Standard

Classification, Nomenclature, and Specification Definitions for Horizontal Earthboring Machines

2007-08-30

HISTORICAL

J2022_200708

This SAE Standard applies to horizontal earthboring machines of the following types: a Auger Boring Machines b Rod Pushers c Rotary Rod Machines d Impact Machines e Directional Boring/Drilling Machines The illustrations used are for classification and are not intended to resemble a particular machine. Only basic working dimensions are given. They may be supplemented by the machine manufacturer. This document is based on existing commercial horizontal earthboring machines. This document does not apply to specialized mining machinery in SAE J1116, conveyors, tunnel boring machines, pipe jacking systems, and microtunnelers.