Refine Your Search

Date

Date

Topic

Topic

Search Results

Viewing 1 to 20 of 35
12Next >Last >>
Sort by relevance
Standard

Operator Enclosure Pressurization System Test Procedure
2023-12-07
CURRENT
J1012_202312
This SAE Recommended Practice establishes a uniform test procedure for evaluating performance of operator enclosure pressurization systems for construction, general-purpose industrial, agricultural, forestry, and specialized mining machinery as categorized in SAE J1116 for off-road, self-propelled work machines.
Standard

Design Guidelines for Air-Conditioning Systems for Off-Road Operator Enclosures
2023-07-10
CURRENT
J169_202307
The purpose of this document is to establish air-conditioning design guidelines that will apply to most systems rather than the specific design of any particular system. Operating conditions and characteristics of the equipment will determine the design of any successful system; since these characteristics and conditions vary greatly from one application to another, the designer shall determine the goals expected to be reached under the conditions encountered. To determine the capacity of such items as blowers, condenser fans, condenser coils, evaporator coils, filters, compressors, etc., will require the adherence to several guidelines, some of which are outlined in the following paragraphs.
Standard

R134a Refrigerant Charge Determination Test Method
2023-04-19
WIP
J3023
The purpose of this document is to establish guidelines for determining the critical R134a refrigerant charge for off-road, self-propelled work machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390. It will develop a minimum to maximum refrigerant charge range in which the HVAC system can maintain proper operation. Operating conditions and characteristics of the equipment will influence the optimum charge. Since these conditions and characteristics vary greatly from one application to another, careful consideration should be taken to determine the optimum R134a refrigerant charge for the HVAC system.
Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment - Part 2: Air Filter Element Test Method
2023-01-25
CURRENT
J3078/2_202301
SAE J3078/2 provides a test method to determine filter performance for fresh and recirculation air filters used in operator enclosures with an air ventilation system. SAE J3078/2 is not applicable for testing vapor and gas filters. The category of machines covered includes off-road self-propelled work machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ASABE standard ANSI/ASAE S390.
Standard

Air Filter Element Test Method
2022-07-14
CURRENT
J1533_202207
This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.
Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 3: Operator Enclosure Pressurization System Test Procedure
2022-02-17
CURRENT
J3078/3_202202
SAE J3078/3 establishes a uniform test procedure for evaluating performance of operator enclosure pressurization systems. This standard is applicable to off-road, self-propelled work machine, as defined in SAE J1116, and includes tractors and machinery for agriculture and forestry as defined in ASABE standard ANSI/ASAE S390.
Standard

Performance Test for Windshield Defrosting Systems for Off-Road, Self-Propelled Work Machines
2021-08-02
CURRENT
J1535_202108
This SAE Standard establishes uniform test procedures for the defrosting systems of off-road, self-propelled work machines used in construction, general purpose industrial, agricultural, and forestry machinery as referenced in table one of this document. It includes tests that can be conducted with uniform test equipment in commercially available laboratory facilities, as well as in an appropriate outdoor environment.
Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 2: Air Filter Element Test Method
2021-04-28
HISTORICAL
J3078/2_202104
SAE J3078/2 specifies two uniform test methods to determine performance levels for fresh and recirculation air filters used in operator enclosures with an air ventilation system. It is not applicable for testing vapor and gas filters. The category of machines covered include off-road self-propelled work machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.
Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment, Part 1: Terms and Definitions
2020-11-05
WIP
J3078/1
SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390.
Standard

Determination of Effect of Solar Heating
2020-07-10
CURRENT
J1559_202007
This document specifies a test method for simulating solar heating in the laboratory and measuring the radiant heat energy from a natural or simulated source. This standard is applicable to all off-road, self-propelled work machines as listed in the scope of SAE J1116 (Rev Nov 2004) when equipped with an operator enclosure system.
Standard

Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 1: Terms and Definitions
2020-01-29
CURRENT
J3078/1_202001
SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390.
Standard

Air Filter Element Test Method
2019-07-03
HISTORICAL
J1533_201907
This SAE test method establishes a uniform test procedure for determining the gravimetric (mass based) efficiency and pressure drop performance levels of operator enclosure panel type filters on off-road, self-propelled work machines used in earth moving, and forestry, as defined in SAE J1116 and for agricultural equipment as defined in ANSI/ASAE S390, and equipped with an operator enclosure with a powered fresh air system. ISO/TS 11155-1 may additionally be used, which describes the use of particle sizing devices to measure the fractional (particle size) efficiency of panel type filters for automotive cabin filter applications. Automotive cabin filters are similar to filters described in this procedure, and the ISO/TS 11155-1 test method is therefore directly applicable.
Standard

R134a Refrigerant Charge Determination Test Method
2018-09-11
CURRENT
J3023_201809
The purpose of this document is to establish guidelines for determining the critical R134a refrigerant charge for off-road, self-propelled work machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390. It will develop a minimum to maximum refrigerant charge range in which the HVAC system can maintain proper operation. Operating conditions and characteristics of the equipment will influence the optimum charge. Since these conditions and characteristics vary greatly from one application to another, careful consideration should be taken to determine the optimum R134a refrigerant charge for the HVAC system.
Standard

Air Conditioning Service Procedures for Off-Road Work Machines and Agricultural Tractors using R-134a or R-1234yf refrigerant
2016-09-12
WIP
J3126
This recommended practice provides technicians with safe and efficient techniques and general equipment recommendations for servicing Mobile Air Conditioning (MAC) systems into Off-Road Self-Propelled Work Machines as defined in SAE J1116 and Tractors and Machinery for Agriculture and Forestry as defined in ANSI/ASAE S390. Both refrigerants R 134a and R-1234yf are covered. Many service procedures are similar for both refrigerants but recovery, recycling, charging, electronic leak detection and other tools can be unique to each refrigerant.
Standard

Performance Test for Windshield Defrosting Systems for Off-Road, Self-Propelled Work Machines
2014-10-24
HISTORICAL
J1535_201410
This SAE Standard establishes uniform test procedures for the defrosting systems of off-road, self-propelled work machines used in construction, general purpose industrial, agricultural, and forestry machinery as referenced in table one of this document. It includes tests that can be conducted with uniform test equipment in commercially available laboratory facilities, as well as in an appropriate outdoor environment.
12Next >Last >>
X