Criteria

Text:
Display:

Results

Viewing 61 to 90 of 113
CURRENT
2006-11-14
Standard
ARP9062A
Operator Self-Verification can apply to a variety of processes. The primary focus is on traditional manufacturing operations, but applications can be made wherever traditional inspection methods are employed. The practices recommended in this document are intended to identify the basic elements for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve overall efficiency and product quality to processes considered mature, as judged by the organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management system standard requirements.
2006-07-31
Standard
AS9101CW
This is the Microsoft Word® version of AS9101C, which defines the content and the presentation of the Assessment Report for the AS9100 standard. AS9101CW is an historical document; a newer version, AS9101DW, exists.
HISTORICAL
2006-07-31
Standard
AS9101C
The purpose of this document is to define the content and the presentation of the Assessment Report for the 9100 standard.
HISTORICAL
2006-07-06
Standard
AS9014
These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. This AS provides the approval process for Auditor Authentication Bodies (AAB), training course providers, trainers and auditors who meet the requirements of AIR5493 and outlines the America’s sector specific process to implement AS9104. This document is created to be in conformance with AS9104.
CURRENT
2006-03-06
Standard
ARP9004A
Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer's quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.
HISTORICAL
2006-01-21
Standard
ARP9009
This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.
CURRENT
2005-10-27
Standard
ARP9013
This SAE Aerospace Recommended Practice (ARP) establishes the general requirements when implementing any of the statistical product acceptance methods as defined in ARP9013/1, ARP9013/2, ARP9013/3, and ARP9013/4. This recommended practice also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of AS9100 plus requirements for retrievability, safety/critical characteristics, quality parameters, and that these parameters protect the customer. This recommended practice is to be used in conjunction with the variety of sampling strategies, statistical techniques, and process control methods of the ARP9013/1 through ARP9013/4 recommended practices as chosen by the organization.
CURRENT
2005-10-27
Standard
ARP9013/3
ARP9013/3 recommended practice specifies a product acceptance system using process control methods. Its purpose is to assure conformance for specified characteristics. Use of process control techniques for product acceptance requires maintaining process stability and capability. A stable and capable process is the best assurance of conforming hardware for the customer. There can be lower inspection costs associated with a process control acceptance approach.
CURRENT
2005-10-27
Standard
ARP9013/4
The purpose of ARP9013/4 is to ensure conformance for each product characteristic being verified under these methods. ARP9013/4 provides the requirements for continuous sampling, skip-lot sampling, and for statistical methods for product acceptance that do not derive from industry standard tables.
CURRENT
2005-10-27
Standard
ARP9013/1
The purpose of this SAE Aerospace Recommended Practice (ARP) is to ensure conformance for each product characteristic being verified in a lot, without maintaining information from previous lots. ARP9013/1 specifies a product acceptance system for isolated lots. For example, isolated lot sampling avoids keeping track of the normal, tightened, and reduced levels of sampling formerly used in MIL-STD-105 and currently used in ANSI/ASQC Z1.4. Because those switching rules provided significant long-term protection for product quality, these isolated lot tables replace that protection in other ways.
CURRENT
2005-10-27
Standard
ARP9013/2
The purpose of ARP9013/2 is to ensure conformance for each product characteristic being verified in each lot in the series. ARP9013/2 document specifies a product acceptance system using either attribute or variable lot acceptance methods documented in ANSI/ASQC Z1.4, ANSI/ASQC Z1.9, and “Zero Acceptance Number Sampling Plans” by Nicholas L. Squeglia.
HISTORICAL
2005-09-09
Standard
ARP9114
Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.
HISTORICAL
2005-09-09
Standard
ARP9107
Limited to the Commercial Aerospace industry where a request is made for a Production Organization (PO) to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to Approved Design and Airworthiness Data. The PO is responsible to provide airworthiness release documentation.
HISTORICAL
2005-06-06
Standard
ARP9005
This document contains recommended practices for the effective control of non-deliverable software. It addresses practices for control during the development, production, release maintenance, and retirement of non-deliverable software, as well as for software procured from outside manufacturers and incorporated in the production, evaluation, test, acceptance or calibration of processes. For the purposes of this document, the terms software and non-deliverable software are considered synonymous.
HISTORICAL
2005-05-10
Standard
ARP9162
The focus of Operator Self-Verification is on traditional manufacturing operations, and applications can be made wherever traditional inspection is employed. The practices recommended in this document are intended to identify the basic elements and provide a “guideline” for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve the overall efficiency and product quality of processes considered mature, as judged by the implementing organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management systems.
HISTORICAL
2005-02-16
Standard
AS9132A
This SAE Aerospace Standard (AS) defines uniform Quality and Technical requirements relative to metallic parts marking performed in using "Data Matrix symbology" used within the aerospace industry. The ISO/IEC 16022 specifies general requirements (data character encodation, error correction rules, decoding algorithm, etc.). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the following requirements to ensure electronic reading of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Electro-Chemical Etching Further marking processes will be included if required. This standard does not specify information to be encoded. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the Data Matrix Marking. Symbol position should allow optimum illumination from all sides for readability.
HISTORICAL
2005-01-21
Standard
AS9104A
These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards.
HISTORICAL
2004-09-13
Standard
AS9104
These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier's activities. It shall be applied to the supplier's complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards.
HISTORICAL
2004-03-24
Standard
ARP9062
Operator Self-Verification can apply to a variety of processes. The primary focus is on traditional manufacturing operations, but applications can be made wherever traditional inspection methods are employed. The practices recommended in this document are intended to identify the basic elements for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve overall efficiency and product quality to processes considered mature, as judged by the organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management system standard requirements.
HISTORICAL
2004-03-03
Standard
ARP9134
Supply Chain Risk Management (SCRM), defined in this guideline, can be applied proactively for the protection of all procured products and services; both flying and non-flying through all levels of the supply chain. The guideline focuses on Quality as a key risk assessment factor taking into account elements from all aspects of the business having a direct link to global quality management. This concept/model is shown in Figure 1. While traditional "small q" Quality is a key element to be assessed, from a company business point of view, other elements play an important part in minimizing risk. This guideline defines such risk factors for consideration. SCRM as a business protection tool will be most effective when used to identify, and reduce risks when generating new business with new and existing suppliers. However, the tools and techniques described hereafter can also be applied to evaluate the existing supply chain network and determine the level of control required.
CURRENT
2004-02-19
Standard
AS9000A
To assure customer satisfaction, aerospace industry manufacturers must produce world class quality products at the lowest possible cost. This document standardizes, to the greatest extent possible, the quality system requirements of the aerospace industry. Standardization of compliance requirements results in cost savings due to the elimination or reduction of unique requirements developed for each different customer.
HISTORICAL
2004-01-13
Standard
AS9102A
This SAE Aerospace Standard (AS) establishes requirements for performing and documenting the First Article Inspection (FAI).
HISTORICAL
2004-01-06
Standard
AS9100B
This standard AS9100 includes ISO 9001:2000 quality management system requirements and specifies additional requirements for a quality management system for the aerospace industry. The additional aerospace requirements are shown in bold, italic text. It is emphasized that the quality management system requirements specified in this standard AS9100 are complementary (not alternative) to contractual and applicable law and regulatory requirements. This International Standard AS9100 specifies requirements for a quality management system where an organization a) needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.
CURRENT
2003-12-19
Standard
AS9000-APPNDX1A
To assure customer satisfaction, aerospace industry manufacturers must produce world class quality products at the lowest possible cost. AS9000 standardizes, to the greatest extent possible, the quality system requirements of the aerospace industry. Standardization of compliance requirements results in cost savings due to the elimination or reduction of unique requirements developed for each different customer. AS9000 Appendix 1, AS9000 Audit Summary and Supplier Profile Instructions, facilitates the standardization of this process.
HISTORICAL
2003-09-04
Standard
ARP9034
This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.
HISTORICAL
2003-08-04
Standard
AS9121
The purpose of this document is to define the content and the presentation of the Assessment Report of AS9120.
HISTORICAL
2003-07-23
Standard
AIR5359B
The requirements defined in this AIR are applicable to Accreditation Bodies (ABs), Certification/Registration Bodies (CRBs), and Original Equipment Manufacturers (OEMs), during assessment and/or certification/registration to the applicable quality management system standard to meet industry accepted practices.
HISTORICAL
2003-06-01
Standard
ARP9113
Viewing 61 to 90 of 113