Criteria

Text:
Display:

Results

Viewing 31 to 60 of 113
HISTORICAL
2014-03-01
Standard
AS9101E
This standard defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization's QMS documentation, and customer and statutory/regulatory requirements. The requirements in this standard are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e., ISO/IEC 17000, ISO/IEC 17021). When there is conflict with these standards, the requirements of the 9101 standard shall take precedence. NOTE 1: In this standard, the term “9100-series standards” comprises the following Aerospace Quality Management System (AQMS) standards: 9100, 9110, and 9120; developed by the IAQG and published by various national standards bodies.
CURRENT
2014-02-06
Standard
ARP9114A
Limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to type design information.
CURRENT
2014-02-06
Standard
ARP9134A
Supply Chain Risk Management (SCRM), defined in this guideline, can be applied proactively for the protection of all procured products and services; both flying and non-flying through all levels of the supply chain. The guideline focuses on Quality as a key risk assessment factor taking into account elements from all aspects of the business having a direct link to global quality management. This concept/model is shown in Figure 1. While traditional “small q” Quality is a key element to be assessed, from a company business point of view, other elements play an important part in minimizing risk. This guideline defines such risk factors for consideration. SCRM as a business protection tool will be most effective when used to identify, and reduce risks when generating new business with new and existing suppliers. However, the tools and techniques described hereafter can also be applied to evaluate the existing supply chain network and determine the level of control required.
CURRENT
2013-07-09
Standard
AS9006A
The basic requirements of AS9100A apply with the following clarifications. This document supplements the requirements of AS9100A for deliverable software. This supplement contains Quality System requirements for suppliers of products that contain deliverable embedded or loadable airborne, spaceborne or ground support software components that are part of an aircraft Type Design, weapon system, missile or spacecraft operational software and/or support software that is used in the development and maintenance of deliverable software. This includes the host operating system software including assemblers, compilers, linkers, loaders, editors, code generators, analyzers, ground simulators and trainers, flight test data reduction, etc., that directly support creation, test and maintenance of the deliverable software.
CURRENT
2012-08-16
Standard
AS9131C
This standard defines the common nonconformance data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. The process of exchanging, coordinating, and approving nonconformance data varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms guidelines for submitting and managing of data through accurate communication. The main objective is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms).
CURRENT
2012-08-16
Standard
AS9103A
This standard is primarily intended to apply to new parts and products, but can also be applied to parts currently in production. The standard shall be applicable to all production processes, that influence the variation of KCs, as well as maintenance processes in which KCs are identified. It applies to assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product. It does not apply to lab-scale, pilot, or pre-production processes. However, particular management of some KCs might be required using other methods than those described in the standard, during these phases of a program, when required by the customer or deemed appropriate by the organization (e.g., Engineering department requirement).
CURRENT
2012-07-31
Standard
AS9003A
This standard includes selected quality system requirements from ISO 9001:2008[1] and AS9100:2009 applicable to noncomplex products and associated manufacturing processes. ISO 9001 text incorporated into this standard appears in standard font; while aviation, space, and defense industry additional requirements, definitions, and notes are presented in bold, italic text. The requirements of this standard are intended to be applied in whole, without any exclusions. Compliance with all corresponding AS9100 requirements is considered to meet/exceed compliance with the requirements of this standard. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence. The process approach described in ISO 9001 and AS9100 applies to this standard.
HISTORICAL
2012-04-26
Standard
AS9110B
This standard includes ISO 9001:20081 quality management system requirements and specifies additional aviation maintenance industry requirements, definitions, and notes as shown in bold, italic text. NOTE: Baseline aviation maintenance requirements originate from IAQG developed 9100:2009 standard; modifications were made, as required, to address maintenance industry specific requirements. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
CURRENT
2012-03-07
Standard
ARP9113A
Supply Chain Risk Management (SCRM), defined in this guideline, can be applied proactively for the protection of all procured products and services; both flying and non-flying through all levels of the supply chain. The guideline focuses on Quality as a key risk assessment factor taking into accoutn elements from all aspects of the business having a direct link to global quality management.
CURRENT
2012-01-31
Standard
AS9104/1
The purpose of this standard is to define the requirements and industry-accepted practices for managing the ICOP scheme, which provides confidence to aviation, space, and defense customers and organizations that their suppliers with certification of their quality management systems, issued by accredited CBs, meet the applicable AQMS standard requirements. The requirements established in this standard are applicable to the IAQG and its three sectors for managing AQMS certification and associated activities. The requirements are applicable to IAQG working groups [e.g., SMS, Other Party Management Team (OPMT)], IAQG member companies, ABs, CBs, Certification Body Management Committees (CBMCs), AABs, TPABs, Training Providers (TPs), and organizations seeking/obtaining AQMS standard certification.
HISTORICAL
2010-04-27
Standard
AS9115
The requirements of 9100 apply with the following clarification for software. This document supplements the 9100 standard requirements for deliverable software and contains quality management system requirements for organizations that design, develop, and/or produce deliverable software for the aviation, space, and defense industry. This includes, as required, support software that is used in the development and maintenance of deliverable software. The deliverable software may be stand-alone, embedded, or loadable into a target computer. Where the use of Hardware Description Language (HDL) or high order language is utilized as the design source of electronic hardware [e.g., Application Specific Integrated Circuit (ASIC), Programmable Logic Device (PLD)], the organization and customer shall agree on the extent of applicability of this supplement. NOTE 1: For airborne electronic hardware guidance, see RTCA/DO-254 or EUROCAE ED-80; and for product realization requirements, see 9100.
HISTORICAL
2010-03-09
Standard
AS9101D
This standard defines requirements for the preparation and execution of the audit process. Additionally, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization’s quality management system documentation, and customer/regulatory requirements.
CURRENT
2009-11-06
Standard
AS9017
This document is intended to prescribe consistent requirements for CSI management for organizations and suppliers who perform work for prime contractors receiving direct contracts from U.S. government agencies (i.e., first-tier or prime suppliers).
2009-08-31
WIP Standard
AS9104/3A
This document provides the minimum requirements (Body of Knowledge) for AQMS auditors who will participate in AQMS certification/registration activities, including the auditor authentication process and requirements for a training organization. It is applicable to auditors seeking formal approval to conduct audits of the AQMS in support of the IAQG, and those who manage the competency element of an AQMS audit program and/or training organizations.
CURRENT
2009-07-29
Standard
AIR5493B
This document has been declared “CANCELLED” as of July 2009 and has been superseded by AS9104/3. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by AS9104/3.
HISTORICAL
2009-06-29
Standard
AS9110A
This standard includes ISO 9001:2008 quality management system requirements and specifies additional aviation maintenance industry requirements, definitions and notes as shown in bold, italic text. NOTE Baseline aviation maintenance requirements originate from IAQG developed 9100:2008 standard; modifications were made, as required, to address maintenance industry specific requirements. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
HISTORICAL
2009-06-29
Standard
AS9120A
This standard includes ISO 9001:20081 quality management system requirements and specifies additional aviation, space and defense industry requirements, definitions and notes as shown in bold, italic text. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
HISTORICAL
2009-06-11
Standard
AS9016
The aviation, space, and defense industries rely on the development and manufacture of complex products comprised of multiple systems, subsystems, and components each designed by individual designers (design activities) at various levels within the supply chain. Each design activity controls various aspects of the configuration and specifications related to the product. When a change to design information is requested or required, the change has to be evaluated against the impacts to the higher-level system. Proposed changes to design information that the design activity identifies to be minor and have no effect on their product requirements or specifications have the potential to be concurrently implemented and approved, where authorized to do so. Changes that affect customer mandated requirements or specifications must be approved prior to implementation.
HISTORICAL
2009-04-16
Standard
AS9131B
This standard defines the common nonconformance data definition and documentation that an internal or external supplier or sub-tier supplier must submit when informing a customer of a nonconformity. The requirements shall be are applicable for reporting a nonconforming product to the owner/operator (i.e., end item user), if specified by contract. Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
HISTORICAL
2009-01-15
Standard
AS9100C
This standard includes ISO 9001:20081 quality management system requirements and specifies additional aviation, space and defense industry requirements, definitions and notes as shown in bold, italic text. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
CURRENT
2008-01-16
Standard
AIR5359C
The requirements defined in this AIR are applicable to Accreditation Bodies (ABs), Certification/Registration Bodies (CRBs), and Original Equipment Manufacturers (OEMs), during assessment and/or certification/registration to the applicable quality management system standard to meet industry accepted practices.
HISTORICAL
2007-09-26
Standard
AS9121A
The purpose of this document is to define the content and the presentation of the Assessment Report for the 9120 standard.
HISTORICAL
2007-09-26
Standard
AS9015
This SAE Aerospace Standard (AS) further defines the requirements for a delegation process identified in Aerospace Quality Management System (AQMS) standards (i.e., AS9100, AS9110, AS9120). This standard establishes minimum requirements for the delegation of product verification to an organization’s suppliers; outlining requirements for the initial delegation (qualification/selection), maintenance, and removal/withdrawal of delegations.
HISTORICAL
2007-09-26
Standard
AS9131A
This standard defines the common nonconformance data definition and documentation that an internal or external supplier or sub-tier supplier must submit when informing a customer of a nonconformity. The requirements shall be are applicable for reporting a nonconforming product to the owner/operator (i.e., end item user), if specified by contract. Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
CURRENT
2007-03-29
Standard
AS9104/3
This document provides the minimum requirements (Body of Knowledge) for AQMS auditors who will participate in AQMS certification/registration activities, including the auditor authentication process and requirements for a training organization. It is applicable to auditors seeking formal approval to conduct audits of the AQMS in support of the IAQG, and those who manage the competency element of an AQMS audit program and/or training organizations.
HISTORICAL
2007-03-29
Standard
AS9104/2
These requirements are applicable to IAQG global sectors when utilizing Aerospace Industry Controlled Other Party (ICOP) schemes for the assessment and certification of supplier quality systems in accordance with the requirements contained in 9104. IAQG member companies have committed to perform sufficient oversight of the Aerospace accreditation/certification assessment processes in order to ensure conformance to established requirements contained in 9104. NOTE: The IAQG OPMT oversight structure is depicted graphically in Appendix A.
Viewing 31 to 60 of 113