Refine Your Search

Topic

Search Results

Standard

Wrench, Spanner

2021-07-28
CURRENT
AS6018A
This SAE Aerospace Standard (AS) covers adjustable and non-adjustable spanner wrenches generally used for aerospace machinery maintenance and for tightening and loosening hose couplings and hydrant caps. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Ratcheting Wrenches, Twelve Point, High Strength, Thin Wall

2021-07-15
CURRENT
AS6405
This SAE Aerospace Standard (AS) covers high strength thin wall ratcheting box wrenches which possess the strength, clearances, and internal wrenching design so configured that, when mated with bihexagonal (12 point) fasteners conforming to the requirement of AS870 for inch sizes and ISO 4095 for metric sizes, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener’s wrenching points. Inclusion of dimensional data in this document is not intended to imply that all products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
Standard

Aerospace Hand Torque Wrenches (Mechanical, Impulse)

2021-01-13
CURRENT
AS28431A
This SAE International Aerospace Standard covers requirements for micrometer adjustable, feel impulse, torque wrenches. The torque wrench is used to apply a pre-set torque to threaded fasteners and other torque requirements.
Standard

Wrenches, Twelve Spline, Metric

2019-05-10
CURRENT
MA1547A
This standard covers the design, performance, and test requirements for high strength, thin wall, commercial sockets, universal sockets, and box wrenches used for the attachment and detachment of metric spline drive, high strength, and high temperature aircraft fasteners. Inclusion of dimensional data in this standard is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. This standard is based on, but not limited to, the following external spline wrenching system:
Standard

Study of Wrenching Engagement on AS870C Double Hexagon (12 Point) Fasteners

2019-05-10
CURRENT
AIR1936A
This study addresses the adequacy of sockets, wrenches, and torque adapters conforming to AS954 to wrench 12 point fasteners with wrenching configurations conforming to AS870C. Reported wrenching problems with smaller sizes are investigated through examining the combined tolerances on the fasteners and wrenches, conducting torque testing on typical high strength lock nuts. Possible solutions to correct these wrenching problems are presented.
Standard

Coating Requirements for Aerospace Hand Tools

2018-09-26
CURRENT
AS4984B
This SAE Aerospace Standard (AS) covers requirements for nickel-chromium coatings, black oxide or black phosphate coatings, and alternative coatings for aerospace hand tools.
Standard

Wrenches; Flare Nut, Crowfoot, 12 Point Non-Distorting

2018-07-20
WIP
AS4167D
This SAE Aerospace Standard (AS) covers 12 point flare nut crowfoot, flare nut wrenches, double end flare nut wrenches, combination box and flare nut wrenches, and ratcheting flare nut wrenches that are designed with the following requirements: (a) Non-distorting usage; (b) Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514; (c) Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting

2018-07-13
WIP
MA4360B
This SAE Metric Aerospace Standard (MA) covers metric double end flare nut wrenches that are designed with the following requirements: a. Non-distorting usage. b. Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514. c. Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Handles and Attachments for Hand Socket Wrenches

2017-12-07
CURRENT
AS4283C
This SAE International Standard covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ASME B107.110, Category 10 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Driver Drills, Battery Powered

2017-01-04
CURRENT
AS4786B
This SAE Aerospace Standard (AS) covers variable speed, reversible battery powered drills with removable, rechargeable battery pack and either 3/8 inch or ½ inch chuck used for general maintenance and construction where a battery powered tool is required. This document also satisfies EMI requirements for driver drills, where EMI suppression is required by the purchaser. This document may involve hazardous materials, operations, or equipment and does not purport to address all of the safety considerations associated. It is the responsibility of the user of a piece of equipment to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer’s instructions prior to use.
Standard

Wrenches; Flare Nut, Crowfoot, 12 Point Non-Distorting

2016-07-06
CURRENT
AS4167C
This SAE Aerospace Standard (AS) covers 12 point flare nut crowfoot, flare nut wrenches, double end flare nut wrenches, combination box and flare nut wrenches, and ratcheting flare nut wrenches that are designed with the following requirements: (a) Non-distorting usage; (b) Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514; (c) Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Wrenches, Hand, Twelve Point, High Strength, Thin Wall

2015-08-05
WIP
AS954H
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with 12-point fasteners conforming to the requirement of AS870, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
Standard

Wrench, Spanner

2013-05-28
HISTORICAL
AS6018
This SAE Aerospace Standard (AS) covers adjustable and non-adjustable spanner wrenches generally used for aerospace machinery maintenance and for tightening and loosening hose couplings and hydrant caps. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting

2013-03-18
CURRENT
MA4360A
This SAE Metric Aerospace Standard (MA) covers metric double end flare nut wrenches that are designed with the following requirements: a Non-distorting usage. b Possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514. c Transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric

2013-02-10
CURRENT
MA4535A
This SAE Metric Aerospace Standard (MA) provides dimensional, performance, testing and other requirements for high strength, thin wall, double head box and combination wrenches which possess an internal wrenching design so configured that, when mated with hexagon (6 point) fasteners, they shall transmit torque to the fastener without bearing on the apex of the fastener’s wrenching points. This standard provides additional requirements beyond ANSI B107.9 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Socket Wrenches, Hand (Metric)

2013-02-10
CURRENT
MA4534A
This SAE Aerospace Standard covers high strength commercial sockets and universal sockets which possess the strength, clearances, and internal wrenching design so configured that, when mated with hexagon (6 point) fasteners, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener’s wrenching points. This document provides additional requirements beyond ANSI B107.5 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
X