Standard
NUT, SPLINE DRIVE - EXTENDED WASHER, CUPWASHER LOCK, UNS S66826, SILVER PLATE, MJ THREAD, METRIC
2024-02-27
CURRENT
MA3351A
Search Results
Standard
CABLE, SAFETY, KIT, NICKEL ALLOY, UNS N0660
2024-02-27
CURRENT
AS3509C
Standard
SPACER, SLEEVE – FOR .250 INCH BOLT, AMS4901 OR AMS4921
2024-02-27
CURRENT
AS3436A
Standard
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, UNCOATED
2024-02-27
CURRENT
MA3329E
Standard
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL UNS S66286, .1900-32UNJF-3A
2024-02-27
CURRENT
AS3099B
Standard
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL UNS S66286,.2500-28 UNJF-3A
2024-02-27
CURRENT
AS3100B
Standard
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION- AND HEAT-RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
2024-02-27
CURRENT
AS9556F
Standard
Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A
2024-02-23
WIP
AS9433C
SCOPE IS UNAVAILABLE.
Standard
Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A
2024-02-23
WIP
AS9434C
SCOPE IS UNAVAILABLE.
Standard
Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A
2024-02-23
WIP
AS9432C
SCOPE IS UNAVAILABLE.
Standard
White Paper to Support Supersession of MIL-S-8879C With AS8879C
2024-02-23
CURRENT
AIR5926A
This paper was prepared to support supersession of MIL-S-8879C with Screw Thread Conformity Task Force selected industry standard AS8879C, published by the Society of Automotive Engineers (SAE). Other documentation changes will be covered by separate papers. Separate papers are anticipated for thread gaging issues, and thread gage calibration procedures. The STC-TF decided that the thread design standard needed to be completed before thread gage definition could be addressed. Thread gage definition has to be known before calibration procedures can be addressed.
Standard
Studs and Inserts, Locked In, Self-Broaching Keys – Hole Dimensions and Installation Requirements
2024-02-23
CURRENT
AS4724A
This specification establishes the procedure for installing hardened key types studs and inserts, eliminating the need for broaching key slots. It also defines the hole preparation necessary to install the studs and inserts.
Standard
RIVET – 100° COUNTERSUNK HEAD, CORROSION RESISTANT STEEL
2024-02-23
CURRENT
AS124951A
Standard
Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for
2024-02-23
WIP
AS7235A
This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the unified numbering system as UNS S66286 and of 80 ksi single shear strength at room temperature.
Standard
Rivets, Blind, Corrosion Resistant Alloy, 67Ni - 31Cu, Procurement Specification For
2024-02-23
WIP
AS7234A
This procurement specification covers tubular, blind rivets fabricated from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04405, and of 52 ksi minimum shear strength for self-plugging style rivets.
Standard
Rivets, Solid, UNS N04400, Corrosion Resistant, 67Ni - 31Cu, Procurement Specification for
2024-02-23
WIP
AS7233A
This procurement specification covers aircraft-quality solid rivets made from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04400 and of 46 ksi minimum shear strength.
Standard
Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant Procurement Specification For
2024-02-12
CURRENT
AS4723A
This procurement specification covers inserts made from A286 alloy of the type identified under the Unified Numbering System as UNS S66286, solid film lubricated with a piastic self locking device, integrated locking keys to positively secure the insert against rotation when properly installed in threaded holes.
Standard
SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION- AND HEAT-RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A
2024-02-12
CURRENT
AS9554F
Standard
NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 °F, UNS N07001
2024-02-12
CURRENT
AS3616A
Standard
Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 °F, UNJ Thread – Procurement Specification
2024-02-06
CURRENT
AS5377A
This specification establishes the requirements for self-locking wrenchable nuts with thread sizes 0.7500 thru 1.5000 inches. The nuts are made of corrosion and heat resistant precipitation hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286 and of 160,000 psi axial tensile strength at room temperature, with maximum conditioning temperature of parts at 800 °F.
