Refine Your Search

Date

Date

Topic

Topic

Search Results

Viewing 81 to 100 of 251
<< First< Previous34567Next >Last >>
Sort by relevance
Standard

SOLUTION, FLUORESCENT PENETRANT Water Base
2011-08-09
HISTORICAL
AMS3158A
This specification covers a stable, noncorrosive, water-soluble, highly-penetrating, fluorescent solution which may, but need not, be diluted with an appropriate amount of water for use.
Standard

IMAGE QUALITY INDICATOR Radiographic
2010-11-01
HISTORICAL
AS1613A
This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospace components, especially in electronic component evaluation and radiographic film and paper classification.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
2010-01-05
HISTORICAL
AMS2630C
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Inspection Process, Magnetic Rubber
2009-07-10
HISTORICAL
AMSI83387A
This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.
Standard

Oil Fluorescent Penetrant, High Fluorescence, Solvent Soluble
2009-01-08
CURRENT
AMS3157D
CANCELLATION NOTICE This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of January 2009 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shall be fulfilled whenever reference is made to the cancelled AMS3157. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS2644.
Standard

Oil, Fluorescent Penetrant, Water Washable
2008-12-15
CURRENT
AMS3156E
This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of December 2008 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shall be fulfilled whenever reference is made to the cancelled AMS3156. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS2644.
Standard

Oil, Fluorescent Penetrant, Solvent-Soluble
2008-12-15
CURRENT
AMS3155E
This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of December 2008 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shall be fulfilled whenever reference is made to the cancelled AMS3155. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS2644.
Standard

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
2008-10-22
HISTORICAL
AMS2630B
This specification covers procedures for ultrasonic inspection, by pulse-echo procedures, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

Magnetic Rubber Inspection Material
2007-04-05
CURRENT
AMS2309A
This specification covers an inspection material in the form of a liquid room-temperature vulcanizing rubber filled with magnetic particles which is cured by addition of one or more curing agents. The product may be supplied in a variety of viscosities and colors.
Standard

Inspection Process, Magnetic Rubber
2007-02-16
HISTORICAL
AMSI83387
This specification covers the general procedural requirements necessary for the performance of magnetic rubber inspection.
<< First< Previous34567Next >Last >>
X