Refine Your Search

Date

Date

Topic

Topic

Search Results

Viewing 41 to 60 of 251
<< First< Previous12345Next >Last >>
Sort by relevance
Standard

Radiographic Paper, 2.5-80
2006-02-20
CURRENT
AMS7295/8C
This specification covers one type of medium-contrast, fine-grain radiographic paper in the form of cut sheets or rolls.
Standard

Radiographic Paper 2.0-80
1998-07-01
HISTORICAL
AMS7295/9B
This specification covers one type of low-contrast, fine-grain radiographic paper in the form of cut sheets or rolls.
Standard

Radiographic Paper, 2.0-80
2006-02-20
CURRENT
AMS7295/9C
This specification covers one type of low-contrast, fine-grain radiographic paper in the form of cut sheets or rolls.
Standard

Contrast Dye Penetrant Inspection
1999-04-01
CURRENT
AMS2646D
Detection of discontinuities such as cracks, laps, porosity, cold shuts, lack of bond, and similar defects. Because inspection can be performed in normal light, this method can be used when fluorescent penetrant inspection is impracticable.
Standard

CONTRAST DYE PENETRANT INSPECTION
1991-10-15
HISTORICAL
AMS2646C
This specification establishes a procedure for detection of discontinuities open to the surface of parts by the use of a penetrating dye.
Standard

Fluoroscopic X-Ray Inspection
1945-08-01
HISTORICAL
AMS2650
This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of 1-1-84. It is recommended that this specification not be specified for new designs. This cover sheet should be attached to the initial issue of the sUbject specification. Noncurrent refers to those procedures which have previously been widely used and which may be required on some existing designs in the future. The Aerospace Materials Division does not recommend these as standard procedures for future use in new designs. Each of these "Noncurrent" specifications is available from SAE upon request. This specification has been CANCELLED by the Aerospace Materials Division, SAE, as of August, 1989. By this action, subject specification number and its title will be deleted from the active specification index of Aerospace Material Specifications.
Standard

Oil, Fluorescent Penetrant Water Washable
1999-08-01
HISTORICAL
AMS3156D
This specification covers a stable, non-corrosive oil or oil-like substance together with a dye or additives necessary to provide a water-washable, highly-penetrating fluorescent solution.
Standard

OIL, FLUORESCENT PENETRANT Water Washable
1983-10-01
HISTORICAL
AMS3156C
This specification covers a stable, non-corrosive oil or oil-like substance together with a dye or additives necessary to provide a water-washable, highly-penetrating fluorescent solution.
Standard

Oil, Fluorescent Penetrant, Water Washable
2008-12-15
CURRENT
AMS3156E
This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of December 2008 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shall be fulfilled whenever reference is made to the cancelled AMS3156. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS2644.
<< First< Previous12345Next >Last >>
X