Search Results

Standard

Titanium Alloy Sheet, Strip, and Plate 13.5V - 11Cr - 3.0Al Solution Heat Treated

2021-12-01

CURRENT

AMS4917K

This specification covers a titanium alloy in the form of sheet, strip, and plate through 4.000 inches (101.6 mm) nominal thickness.

Standard

Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated

2021-12-01

HISTORICAL

AMS4976L

This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal diameter or least distance between parallel sides and 9 in2 (58 cm2) and under in cross-sectional area and forging stock of any size (see 8.7).

Standard

Titanium Alloy, Bars, Wire, and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and Precipitation Heat Treated

2021-12-01

CURRENT

AMS4975P

This specification covers a titanium alloy in the form of bars, wire, flash welded rings 3.00 inches (76.2 mm) and under in nominal diameter or least distance between parallel sides and 16 in2 (103 cm2) and under in cross-sectional area and stock of any size for flash welded rings (see 8.6).

Standard

Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed

2021-09-22

WIP

AMS6931E

This specification covers a titanium alloy in the form of bars and forgings up through 10.000 inches (254.00. mm), inclusive, in diameter or least distance between parallel sides with a maximum cross-sectional area of 79.0 in2 (506.45 cm2) and forging stock of any size (see 8.7).

Standard

Identification, Titanium and Titanium Alloy Wrought Products

2021-09-21

WIP

AMS2809B

This specification covers procedures for identifying wrought products of titanium and titanium alloys.

Standard

Tolerances Titanium and Titanium Alloy Extruded Bars, Rods, and Shapes

2021-09-14

CURRENT

AMS2245C

This specification covers established manufacturing tolerances applicable to titanium and titanium alloy extruded bars, rods, and shapes. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.

Standard

Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes, 6Al - 4V Annealed

2021-08-05

WIP

AMS4928X

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes up through 10.000 inches (254.00 mm) inclusive in diameter or least distance between parallel sides and stock of any size for forging or flash welded rings.

Standard

Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength

2021-07-07

CURRENT

AMS4921R

This specification covers one grade of commercially pure titanium in the form of bars, wire, forgings, flash welded rings, up to 4.000 inches (101.60 mm), inclusive, in nominal diameter or least distance between parallel sides, and stock for forging or flash welded rings.

Standard

Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed

2021-06-10

CURRENT

AMS4910S

This specification covers a titanium alloy in the form of sheet, strip, and plate up to 4.000 inches (101.60 mm), inclusive, in thickness.

Standard

Tolerances Titanium and Titanium Alloy Tubing

2021-04-19

CURRENT

AMS2244D

This specification covers established manufacturing tolerances applicable to titanium and titanium alloy tubing. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range.

Standard

Approval and Control of Premium-Quality Titanium Alloys

2021-03-23

WIP

AMS2380H

This specification covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.

Standard

Titanium Alloy, Bars and Forgings, 9V – 3.5Al – 5Sn - 3Zr - 2.5Mo Consumable Electrode Melted, Solution Heat Treated and Aged 160 ksi (1103 MPa) Tensile Strength

2021-03-22

WIP

G21AA

This specification covers a titanium alloy in the form of bars and forgings 11.0 inches (279.4 mm) and under in nominal cross-sectional thickness diameter and of forging stock.

Standard

Forgings, Titanium Alloys Heat-Treated, Finished-Part Properties: Short-Transverse Tensile, Fracture Toughness, and Longitudinal Time-Dependent-Tension

2021-02-04

WIP

AMS4938B

This specification establishes requirements for titanium forgings of any shape or form from which finished parts are to be made. (See 8.3, 8.5.4, and 8.7). These forgings are used typically in the manufacture of high-performance parts when control of short-transverse tensile, fracture toughness, tensile creep, or tensile rupture is required, but usage is not limited to such applications.

Standard

Columbium (Niobium) Sheet, Strip, and Foil

2021-02-04

WIP

AMS7850F

This specification covers columbium in the form of sheet, strip, plate, and foil. This material has been used typically for parts requiring exposure to ultra-high temperatures, but usage is not limited to such applications. Applications in oxidizing atmospheres necessitate a protective coating. Although produced in the cold rolled condition, this material is intended to be used in the annealed condition.

Standard

Columbium (Niobium) Alloy Sheet, Strip, and Plate, 10Hf - 1.0Ti

2021-02-04

WIP

AMS7852D

This specification covers a columbium (niobium) alloy in the form of sheet, strip, and plate.

Standard

Columbium (Niobium) Alloy Bars, Rods, and Extrusions 10Hf - 1.0Ti, Recrystallization Annealed

2021-02-04

WIP

AMS7857D

This specification covers a columbium (niobium) alloy in the form of bars, rods, and extrusions.

Standard

Titanium Alloy, Sheet and Strip 15Mo - 3.0AI - 2.8Cb - 0.20Si

2020-12-21

CURRENT

AMS4897E

This specification covers a titanium alloy in the form of sheet and strip 0.125 inch (3.18 mm) and under in nominal thickness.

Standard

Tungsten Heavy Alloy Shapes, Sintered, High Density

2020-11-12

CURRENT

AMS7725F

This specification covers four classes of tungsten heavy metal in the form of sintered and annealed shapes.

Standard

Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial Annealed

2020-10-09

CURRENT

AMS4930L

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or distance between parallel sides, and stock for forging or flash welded rings of any size.

Standard

Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex Annealed

2020-10-09

CURRENT

AMS6907C

This specification covers a titanium alloy in the form of bars, forgings up through 4.000 inches (101.60 mm), inclusive in nominal diameter or least distance between parallel sides and 32 square inches (206.46 cm2) maximum cross sectional area, and stock for forging of any size.