Search Results

Standard

Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed

2023-02-20

CURRENT

AMS4989E

This specification covers a titanium alloy in the form of sheet, strip, and plate up through 1.000 inch (25.40 mm), inclusive.

Standard

Titanium Alloy Bars, Forgings and Forging Stock, 3.0Al - 2.5V, Annealed

2023-02-13

WIP

AMS6940C

This specification covers a titanium alloy in the form of bars up through 1.000 inch (25.40 mm) in diameter or least distance between parallel sides, inclusive, forgings of thickness up through 1.000 inch (25.40 mm), inclusive, high strength fastener stock up through 1.250 inch (31.75 mm), inclusive, and stock for forging of any size.

Standard

Standard Practice for Production, Distribution, and Procurement of Metal Stock

2023-02-13

WIP

AS6279C

This SAE Aerospace Standard (AS) establishes requirements applicable to metal stock that is ordered and produced in accordance with an Aerospace Material Specification (AMS). Topics include producer requirements, distributor requirements, size and grain orientation nomenclature, and purchaser ordering information to distributors. Requirements of this document have been developed to address titanium and titanium alloys, aluminum and aluminum alloys, carbon and alloy steels, and corrosion and heat-resistant alloys.

Standard

Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated

2023-02-06

CURRENT

AMS4976M

This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal diameter or least distance between parallel sides and 9 square inches (58 cm2) and under in cross-sectional area and forging stock of any size (see 8.6).

Standard

General Agreement GAG23AA - Non-Destructive Testing of Small Diameter Titanium Seamless Tube Product

2023-01-30

WIP

GAG23AA

General agreement provides guidance for non-destructive testing of small diameter titanium seamless tube product

Standard

Titanium Alloy, Sheet, 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si, Annealed

2022-11-22

CURRENT

AMS4898F

This specification covers a titanium alloy in the form of sheet in nominal thicknesses 0.016 through 0.1874 inch (0.41 through 4.760 mm).

Standard

Titanium Alloy, Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat Treated

2022-11-22

CURRENT

AMS4914H

This specification covers a titanium alloy in the form of sheet and strip up to and including 0.125 inch (3.18 mm) in nominal thickness.

Standard

Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated

2022-11-14

CURRENT

AMS6925D

This specification covers a titanium alloy in the form of bars up through 7.000 inches (177.80 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 7.000 inches (177.80 mm), inclusive, and stock for forging of any size.

Standard

Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged

2022-11-14

CURRENT

AMS6926D

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6).

Standard

Titanium Alloy, Bars and Rods 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Centerless Ground or Peeled and Polished

2022-11-02

CURRENT

AMS4958F

This specification covers a titanium alloy in the form of bars and rods 1.00 inch (25.4 mm) and under in nominal diameter.

Standard

Titanium Alloy Bars, Forgings, and Forging Stock 4Al - 2.5V - 1.5 Fe Single Hearth Melted, Annealed

2022-10-26

CURRENT

AMS6950A

This specification covers a titanium alloy in the form of bars and forgings 14.000 inches (355.60 mm) and under in nominal diameter or least distance between parallel sides and stock for forging (see 8.6).

Standard

Titanium Alloy, Forgings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength

2022-10-13

CURRENT

AMS4966S

This specification covers a titanium alloy in the form of forgings up through 4.0 inches (102 mm) and under in nominal diameter or least distance between parallel sides and 16 square inches (103 cm2) and under in cross-sectional area and stock of any size for forging (see 8.6).

Standard

Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes, 4Al - 2.5V -1.5 Fe, Annealed, Heat Treatable

2022-09-14

WIP

AMS6947C

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes 4.000 inches (101.60 mm) and under, and stock for forging, heading, or flash welded rings of any size.

Standard

Titanium Alloy Bars, Forgings, and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, Solution Heat Treated and Aged

2022-09-14

WIP

AMS6906D

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.7).

Standard

Titanium Alloy Bars, Forgings and Forging Stock, 3Al - 8V - 6Cr - 4Mo - 4Zr, Solution Heat Treated

2022-09-14

WIP

AMS6920E

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6).

Standard

Titanium Alloy Bars, Forgings and Forging Stock, 3Al - 8V - 6Cr - 4Mo - 4Zr, Solution Heat Treated and Aged

2022-09-14

WIP

AMS6921D

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6).

Standard

Heat Treatment of Titanium Alloy Parts

2022-09-08

HISTORICAL

AMS2801C

This specification establishes the engineering requirements for the heat treatment of titanium and titanium alloy parts. Heat treatment of raw material by raw material producers, forge shops, or foundries shall be in accordance with the material procurement specification AMS-H-81200.

Standard

Titanium Alloy Bars, Forgings and Forging Stock, 8Al - 1Mo - 1V, Duplex Annealed

2022-08-19

CURRENT

AMS6910D

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm), inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6).

Standard

Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and Aged

2022-08-19

CURRENT

AMS6930G

This specification covers a titanium alloy in the form of round, hexagon and square bars and forgings up through 3.000 inches (76.20 mm), inclusive, rectangular bar and forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and forging stock of any size (see 8.6).

Standard

Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged

2022-08-17

CURRENT

AMS4965N

This specification covers a titanium alloy in the form of bars, wire, forgings, and flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides and of stock of any size for forging and flash welded rings.