Search Results

Standard

Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed

2019-05-28

CURRENT

AMS6948B

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes 5.000 inches (127.00 mm) and under, and stock for forging or flash welded rings of any size.

Standard

Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength

2019-05-28

CURRENT

AMS4984G

This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal cross-sectional thickness and of stock for forging of any size.

Standard

Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo Annealed

2019-05-28

HISTORICAL

AMS4964C

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging or flash welded ring up through 6.000 inches (152.40 mm) in nominal diameter or distance between parallel sides.

Standard

Titanium Alloy Bars, Forgings and Forging Stock 3.0Al - 2.5V Annealed

2019-05-17

CURRENT

AMS6940B

This specification covers a titanium alloy in the form of bars up through 1.000 inch (25.40 mm) in diameter or least distance between parallel sides, inclusive, forgings of thickness up through 1.000 inch (25.40 mm), inclusive, high strength fastener stock up through 1.250 inch (31.75 mm), inclusive, and stock for forging of any size.

Standard

Chemical Check Analysis Limits Titanium and Titanium Alloys

2019-04-05

CURRENT

AMS2249J

This specification defines limits of variation for determining acceptability of the composition of cast or wrought titanium and titanium alloy parts and material acquired from a producer.

Standard

Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn Annealed

2019-04-05

HISTORICAL

AMS6936C

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, with bars and forgings having a maximum cross-sectional area of 32 in2 (204.5 cm2), and stock for forging of any size (see 8.6).

Standard

Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength

2019-04-02

CURRENT

AMS4986F

This specification covers a titanium alloy in the form of forgings 4.0 inches (101.6 mm) and under in nominal cross-sectional thickness and of forging stock.

Standard

Titanium Alloy Bars, Forgings and Forging Stock 5Al - 2.5Sn Annealed

2019-04-02

HISTORICAL

AMS6900C

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size.

Standard

Titanium Alloy Bars, Forgings, and Forging Stock 5Al - 2.5Sn, Extra Low Interstitial Annealed

2019-04-02

HISTORICAL

AMS6901C

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size.

Standard

Titanium Alloy Bars, Forgings and Forging Stock 6.0Al – 6.0V – 2.0Sn Solution Heat Treated and Aged

2019-04-02

HISTORICAL

AMS6935C

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, with bars and forgings having a maximum cross-sectional area of 32 in2 (204.46 cm2), and stock for forging of any size (see 8.7).

Standard

Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged

2019-01-31

HISTORICAL

AMS6926C

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6).

Standard

Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated

2019-01-28

HISTORICAL

AMS6925C

This specification covers a titanium alloy in the form of bars up through 7.000 inches (177.80 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 7.000 inches (177.80 mm), inclusive, and stock for forging of any size.

Standard

Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated

2019-01-25

CURRENT

AMS6920D

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6).

Standard

Titanium Alloy Bars, Forgings and Forging Stock 3Al - 8V - 6Cr - 4Mo - 4Zr Solution Heat Treated and Aged

2019-01-25

CURRENT

AMS6921C

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6).

Standard

Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed, Heat Treatable

2019-01-07

CURRENT

AMS6947B

This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes 4.000 inches (101.60 mm) and under, and stock for forging, heading, or flash welded rings of any size.

Standard

Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution Heat Treated and Aged

2019-01-07

CURRENT

AMS6906C

This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.7).

Standard

Titanium Alloy Bars, Wire, and Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized

2019-01-04

HISTORICAL

AMS4972J

This specification covers a titanium alloy in the form of bars, wire, flash welded rings up through 4.000 inches (101.60 mm), inclusive in diameter or least distance between parallel sides, and stock for flash welded rings or heading of any size.

Standard

Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength

2019-01-04

HISTORICAL

AMS4900R

This specification covers one grade of commercially-pure titanium in the form of sheet, strip, and plate 1.000 inch (25.40 mm) and under in nominal thickness.

Standard

Aluminum-Beryllium Alloy, Sheet and Plate 38Al - 62Be

2018-12-28

CURRENT

AMS7913D

This specification covers an aluminum-beryllium alloy in the form of sheet and plate consolidated from powder by extrusion and then rolled.

Standard

Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade

2018-12-28

CURRENT

AMS7904E

This specification covers beryllium in the form of bars, rods, tubing, and machined shapes fabricated from vacuum hot pressed powder.