Search Results

Standard

Cobalt Alloy, Corrosion- and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C

2023-05-16

CURRENT

AMS5788G

This specification covers a corrosion and heat-resistant cobalt alloy in the form of welding rods, coating rods, or wrought wire.

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast

2023-05-16

CURRENT

AMS5402D

This specification covers a corrosion and heat-resistant, air-melted, nickel alloy in the form of investment castings.

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated

2023-05-16

CURRENT

AMS5590G

This specification covers a corrosion and heat-resistant nickel alloy in the form of seamless tubing having nominal OD of 0.125 inch (3.18 mm) and over with nominal wall thickness of 0.015 inch (0.38 mm) and over (see 8.5).

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast

2023-05-16

CURRENT

AMS5401C

This specification covers a corrosion and heat-resistant, vacuum melted, nickel alloy in the form of investment castings.

Standard

Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni -15W

2023-05-16

CURRENT

AMS5796F

This specification covers a corrosion and heat-resistant cobalt alloy in the form of welding wire.

Standard

Steel, Corrosion Resistant, Tubing 19Cr - 10Ni High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper

2023-05-10

CURRENT

AMS5564D

This specification covers a corrosion-resistant steel in the form of welded and drawn or seamless and drawn tubing.

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed

2023-05-10

CURRENT

AMS5540R

This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, and plate up to 2.000 inches (50.80 mm), inclusive, in nominal thickness.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardened (H950)

2023-04-17

WIP

AMS5629/H950A

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness, or for hexagons, least distance between parallel sides in the solution and precipitation heat treated (H950) condition.

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb (Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable

2023-04-04

CURRENT

AMS5441C

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, and flash welded rings in the solution heat-treated condition, 5 inches (127 mm) and under in nominal diameter or least distance between parallel sides (thickness) having a maximum cross-sectional area of 50 square inches (323 cm2), and stock of any size for forging, flash welded rings, or heading.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1050)

2023-03-23

CURRENT

AMS5629/H1050

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness, or for hexagons, least distance between parallel sides in the solution and precipitation heat treated (H1050) condition.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1150)

2023-03-23

CURRENT

AMS5629/H1150

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides in the solution and precipitation heat treated (H1150) condition.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1100)

2023-03-23

CURRENT

AMS5629/H1100

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness, or for hexagons, least distance between parallel sides in the solution and precipitation heat treated (H1100) condition.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H950)

2023-03-23

CURRENT

AMS5629/H950

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness, or for hexagons, least distance between parallel sides in the solution and precipitation heat treated (H950) condition.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1025)

2023-03-23

CURRENT

AMS5629/H1025

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness, or for hexagons, least distance between parallel sides in the solution and precipitation heat treated (H1025) condition.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1000)

2023-03-23

CURRENT

AMS5629/H1000B

This specification covers a corrosion-resistant steel product 12 inches (305 mm) and under in nominal diameter, thickness, or for hexagons, least distance between parallel sides in the solution and precipitation heat treated (H1000) condition.

Standard

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated

2023-03-23

CURRENT

AMS5707P

This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings. Product covered by this specification is limited to a nominal 3.25 inches (82.6 mm) and under in diameter or maximum cross-sectional dimension between parallel sides (thickness) and stock of any size for forging and for flash welded rings.

Standard

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 13Cr (0.30 - 0.40C) (420F, 420FSe) Free-Machining Grade, Annealed

2023-03-20

CURRENT

AMS5620J

This specification covers two types of corrosion- and heat-resistant steel in the form of bars, wire, forgings, and forging stock.

Standard

Steel, Corrosion- and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated and Work-Strengthened Consumable Electrode Remelted 200 ksi (1379 MPa) Tensile Strength Capability

2023-03-20

CURRENT

AMS5726F

This specification covers a corrosion- and heat-resistant steel in the form of work-strengthened bars and wire 1-1/4 inches (31.8 mm) and under in nominal diameter or least distance between parallel sides.

Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Forging Stock and Mechanical Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted

2023-03-20

CURRENT

AMS5749G

This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, and forging stock.

Standard

Cobalt Alloy, Corrosion and Heat-Resistant, Strip, 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe, Solution Heat Treated, Cold Rolled, and Aged, Vacuum Induction Plus Vacuum Consumable Electrode Melted

2023-02-23

WIP

AMS5875E

This specification covers a corrosion and heat-resistant cobalt alloy in the form of strip 0.100 inch (2.54 mm) and under in specified thickness and 4.000 inches (101.60 mm) and under in specified width.