Search Results

Standard

Aluminum Alloy, Sheet, and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated

2023-08-16

CURRENT

AMS4193E

This specification covers an aluminum alloy in the form of flat sheet and plate 0.020 to 0.500 inch (0.51 to 12.70 mm) and under in nominal thickness (see 8.5).

Standard

Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Tolerance, Annealed

2023-08-01

CURRENT

AMS4079J

This specification covers an aluminum alloy in the form of drawn, round, seamless tubing with wall thickness of 0.018 to 0.500 inch (0.46 to 12.70 mm), inclusive (see 8.6).

Standard

Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T361) Solution Heat Treated and Cold Worked

2023-08-01

CURRENT

AMS4269B

This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 0.500 inch (0.508 to 12.70 mm), inclusive, in thickness, supplied in the -T361 temper (see 8.5).

Standard

Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed

2023-08-01

CURRENT

AMS4080R

This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).

Standard

Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg - 0.25Cr (5052-O) Annealed

2023-08-01

CURRENT

AMS4070P

This specification covers an aluminum alloy in the form of drawn, round seamless tubing with wall thicknesses of 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive (see 8.5).

Standard

Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged

2023-06-27

CURRENT

AMS4299B

This specification covers an aluminum alloy in the form of plate 0.50 to 2.50 inches (6.35 to 63.50 mm), inclusive, in nominal thickness (see 8.6).

Standard

Tolerances Copper and Copper Alloy Wire

2023-06-13

CURRENT

AMS2224H

This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy wire ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.

Standard

Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-O) Annealed

2023-06-13

CURRENT

AMS4015N

This specification covers an aluminum alloy in the form of sheet and plate 0.006 to 3.000 inches (0.15 to 76.20 mm), inclusive, in nominal thickness (see 8.5).

Standard

Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated

2023-05-17

CURRENT

AMS4111F

This specification covers an aluminum alloy in the form of die forgings or hand forgings up to 5 inches (125 mm) in thickness, and forging stock of any size (see 8.7).

Standard

Aluminum Alloy, Coiled Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4) Solution Treated

2023-05-10

CURRENT

AMS4477B

This specification covers an aluminum alloy in the form of coiled sheet 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in thickness, supplied in the -T4 temper (see 8.5).

Standard

Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)

2023-05-10

CURRENT

AMS4245G

This specification covers an aluminum alloy in the form of welding wire.

Standard

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-O) Annealed

2023-05-10

CURRENT

AMS4071P

This specification covers an aluminum alloy in the form of drawn, round seamless tubing having a wall thickness of 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive, and nominal outside diameters of 0.125 to 3.000 inch (3.18 to 76.2 mm), inclusive (see 8.5).

Standard

Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked

2023-05-10

CURRENT

AMS4296D

This specification covers an aluminum alloy in the form of sheet and plate 0.032 to 0.310 inch (0.81 to 7.87 mm), inclusive, in thickness, clad on both sides (see 8.5).

Standard

Tolerances Copper and Copper Alloy Sheet, Strip, and Plate

2023-05-10

CURRENT

AMS2222L

This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy sheet, strip, and plate ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.

Standard

Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged

2023-05-10

CURRENT

AMS4107H

This specification covers an aluminum alloy in the form of die forgings up to 6.000 inches (152.40 mm), inclusive, in nominal thickness and forging stock of any size (see 8.6).

Standard

Aluminum Alloy, Sheet, and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)

2023-05-10

CURRENT

AMS4599B

This specification covers an aluminum alloy in the form of sheet and plate from 0.020 to 6.000 inches (0.51 to 152.40 mm), inclusive, in thickness (see 8.5).

Standard

Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated

2023-05-10

CURRENT

AMS4113G

This specification covers an aluminum alloy in the form of extruded profiles such as angles, channels, tees, zees, I-beams, and H-beams.

Standard

Aluminum Alloy, Extrusionsn 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511) Solution Heat Treated and Stress Relieved by Stretching (Composition similar to UNS A92026)

2023-03-20

WIP

AMS4338C

This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles (shapes) with a maximum cross-sectional area of 25 in2 (161 cm2), a maximum circle size of 12 inches (305 mm) and a nominal thickness up to 3.250 inch (82.54 mm), inclusive.

Standard

Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated

2023-03-20

WIP

AMS4314F

This specification covers an aluminum alloy in the form of rolled or forged rings up to 8 inches (203 mm), inclusive, in nominal thickness at the time of heat treatment, and having an OD to wall thickness ratio of 10 or greater (see 8.6).

Standard

Aluminum Alloy, Extrusion, 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg - 0.08Zr (2099-T81), Solution Heat Treated, Stress Relieved by Stretching 1 to 3% and Aged

2023-03-20

WIP

AMS4459C

This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles (shapes) from 0.375 to 1.300 inches (9.53 to 33.02 mm) in diameter or thickness, produced with cross sectional area of 22.5 in2 (145 cm2) maximum, and a circumscribing circle diameter (circle size) of 17.4 inches (44.2 cm) maximum. See 8.3 for definition of circumscribing circle size.