Search Results

Standard

Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

2023-09-28

CURRENT

AMS4179E

This specification covers an aluminum alloy in the form of die forgings not over 3 inches (76 mm) and hand forgings up to 6 inches (150 mm), inclusive, in nominal thickness at the time of heat treatment, and forging stock of any size (see 8.7).

Standard

Aluminum Alloy, Drawn, Round Seamless Tubing Close Tolerance 2.5Mg - 0.25Cr (5052-O) Annealed

2023-09-21

CURRENT

AMS4069G

This specification covers an aluminum alloy in the form of drawn, round seamless tubing 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive, in wall thickness (see 8.5).

Standard

Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-O) Annealed

2023-09-21

CURRENT

AMS4056J

This specification covers an aluminum alloy in the form of sheet and plate 0.051 to 8.000 inches (1.30 to 203.20 mm), inclusive, in thickness (see 8.5).

Standard

Copper-Beryllium Alloy, Bars and Rods, 98Cu - 1.9Be, Solution and Precipitation Heat Treated (TF00, formerly AT)

2023-09-10

WIP

AMS4533F

This specification covers a copper beryllium alloy in the form of bars and rods.

Standard

Copper-Nickel-Tin Alloy, Bars and Rods, 77Cu - 15Ni - 8Sn, Solution Annealed, Cold Finished and Spinodal Hardened (TX TS)

2023-09-10

WIP

AMS4597B

This specification covers a copper-nickel-tin alloy in the form of bars and rods.

Standard

Heat Treatment of Wrought Copper Beryllium Alloy Parts

2023-09-10

WIP

AMS2728D

This specification establishes the requirements for heat treatment of wrought copper beryllium parts (See 1.2.2 and 8.2.1) by users or by their vendors or subcontractors.

Standard

Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings, 98Cu - 1.9Be, Solution Heat Treated TB00 (A)

2023-09-10

WIP

AMS4650P

This specification covers a copper-beryllium alloy in the form of bars, rods, shapes, and forgings.

Standard

Copper-Beryllium Alloy, Sheet and Strip, 98Cu - 1.9Be, Half Hard (TD02)

2023-09-10

WIP

AMS4532J

This specification covers one type of copper-beryllium alloy in the form of sheet and strip.

Standard

Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged

2023-09-05

CURRENT

AMS4206D

This specification covers an aluminum alloy in the form of plate 0.500 to 1.500 inches (12.70 to 38.10 mm), inclusive, in thickness (see 8.6).

Standard

Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged

2023-09-05

CURRENT

AMS4342G

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles 5.000 inches (127.00 mm) and under in nominal diameter or thickness and 32 square inches (206 cm2) and under in cross-sectional area, and tubing 3.000 inches (76.20 mm) and under in wall thickness and 20 square inches (129 cm2) and under in cross-sectional area (see 8.5).

Standard

GAD23AC Weld Wire Cut Length

2023-08-31

WIP

GAD23AC

Creation of standardized wording for the cut length of weld wire provides standard lengths based on industry equipment and to allow other lengths as specified by the purchaser as requested

Standard

Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged

2023-08-30

CURRENT

AMS4081K

This specification covers an aluminum alloy in the form of seamless, round tubing with wall thickness of 0.025 to 0.500 inch (0.64 to 12.70 mm) (see 8.6).

Standard

Aluminum Alloy, Sheet, and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated

2023-08-16

CURRENT

AMS4193E

This specification covers an aluminum alloy in the form of flat sheet and plate 0.020 to 0.500 inch (0.51 to 12.70 mm) and under in nominal thickness (see 8.5).

Standard

Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Tolerance, Annealed

2023-08-01

CURRENT

AMS4079J

This specification covers an aluminum alloy in the form of drawn, round, seamless tubing with wall thickness of 0.018 to 0.500 inch (0.46 to 12.70 mm), inclusive (see 8.6).

Standard

Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T361) Solution Heat Treated and Cold Worked

2023-08-01

CURRENT

AMS4269B

This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 0.500 inch (0.508 to 12.70 mm), inclusive, in thickness, supplied in the -T361 temper (see 8.5).

Standard

Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed

2023-08-01

CURRENT

AMS4080R

This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).

Standard

Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg - 0.25Cr (5052-O) Annealed

2023-08-01

CURRENT

AMS4070P

This specification covers an aluminum alloy in the form of drawn, round seamless tubing with wall thicknesses of 0.010 to 0.450 inch (0.25 to 11.43 mm), inclusive (see 8.5).

Standard

Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged

2023-06-27

CURRENT

AMS4299B

This specification covers an aluminum alloy in the form of plate 0.50 to 2.50 inches (6.35 to 63.50 mm), inclusive, in nominal thickness (see 8.6).

Standard

Tolerances Copper and Copper Alloy Wire

2023-06-13

CURRENT

AMS2224H

This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy wire ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.

Standard

Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-O) Annealed

2023-06-13

CURRENT

AMS4015N

This specification covers an aluminum alloy in the form of sheet and plate 0.006 to 3.000 inches (0.15 to 76.20 mm), inclusive, in nominal thickness (see 8.5).