Search Results

Standard

Magnesium Alloy, Sand Castings, 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6), Solution and Precipitation Heat Treated

2024-02-13

WIP

AMS4429C

This specification covers a magnesium alloy in the form of sand castings.

Standard

Brass, Naval, Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn, Half Hard (H02)

2024-02-13

WIP

AMS4611K

This specification covers a copper alloy (naval brass) in the form of bars and rods. These products have been used typically for automatic screw machine parts, but usage is not limited to such applications. These products have better corrosion resistance than AMS4610 but are less readily machinable.

Standard

Uphill Quenching of Aluminum Alloy Product

2024-02-05

WIP

AMS2767B

This specification establishes engineering requirements for the uphill quenching process. Uphill quenching immerses product in liquid nitrogen followed by exposure to a high pressure/velocity steam blast or boiling water.

Standard

Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved

2024-02-01

CURRENT

AMS4616H

This specification covers one type of bronze in the form of bars, rods, forgings, tubing, and forging stock (see 8.5).

Standard

Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock, 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61), Solution and Precipitation Heat Treated

2024-01-29

WIP

AMS4132J

This specification covers an aluminum alloy in the form of die forgings, hand forgings, and rolled rings 4 inches (102 mm) and under in nominal thickness, and forging stock of any size (see 8.6).

Standard

Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), Solution and Precipitation Heat Treated

2024-01-29

WIP

AMS4083N

This specification covers an aluminum alloy in the form of seamless round tubing with wall thickness from 0.025 to 0.500 inch (0.64 to 12.70 mm), inclusive (see 8.6).

Standard

Magnesium Alloy, Sand Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated

2024-01-25

WIP

AMS4443J

This specification covers a magnesium alloy in the form of sand castings.

Standard

Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged

2024-01-22

CURRENT

AMS4343G

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing up to 5.000 inches, (127.00 mm), inclusive, in nominal diameter or least thickness (see 8.5).

Standard

Aluminum Alloy, Alclad, Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat Treated

2024-01-16

CURRENT

AMS4100G

This specification covers an aluminum alloy in the form of alclad sheet 0.040 to 0.249 inch (1.02 to 6.32 mm), inclusive, in nominal thickness (see 8.5).

Standard

Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

2024-01-16

CURRENT

AMS4094E

This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 0.499 inch (0.51 to 12.67 mm), inclusive, in nominal thickness, clad on two sides (see 8.5).

Standard

Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-H34) Strain-Hardened, Half-Hard, and Stabilized

2024-01-16

CURRENT

AMS4017M

This specification covers an aluminum alloy in the form of sheet and plate 0.009 to 1.000 inch (0.23 to 25.40 mm), inclusive, in nominal thickness (see 8.5).

Standard

Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2024-01-16

CURRENT

AMS4341H

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or thickness (wall thickness of tubing) and 32 square inches (206 cm2) and under in cross-sectional area (see 8.5).

Standard

Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451), Solution Heat Treated, Stress Relieved, and Overaged

2024-01-15

WIP

AMS4354B

This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.6).

Standard

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated

2023-12-20

CURRENT

AMS4256D

This specification covers an aluminum alloy in the form of sheet 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in nominal thickness, clad on two sides (see 8.5).

Standard

Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged

2023-12-20

CURRENT

AMS4413C

This specification covers an aluminum-lithium alloy in the form of plate 0.500 to 8.000 inches (12.70 to 203.20 mm), inclusive, in thickness (see 8.5).

Standard

Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles, 1.0Mg - 0.80Si - 1.8Cu - 0.20Cr (2013 -T6511), Solution Heat Treated, Stress-Relieved by Stretching, and Aged

2023-12-14

CURRENT

AMS4326B

This specification covers an aluminum alloy in the form of extruded bars, rods, and integrated profiles up to 0.200 inch (5.08.mm), inclusive, in nominal thickness (see 8.5).

Standard

Aluminum Alloy, Clad One Side Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet), As Fabricated

2023-12-14

CURRENT

AMS4255E

This specification covers an aluminum alloy in the form of sheet over 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in thickness, clad on one side (see 8.5).

Standard

Aluminum Alloy, Die Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged

2023-12-13

CURRENT

AMS4403B

This specification covers an aluminum alloy in the form of die forgings 1.000 to 12.000 inches (25 to 305 mm), inclusive, in nominal thickness at the time of heat treatment and of forging stock of any size. (see 8.5)

Standard

Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T8511), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Precipitation Heat Treated, and Straightened

2023-12-13

WIP

AMS4423A

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing produced with cross sectional area of 32 in2 (206 cm2) maximum.

Standard

Magnesium Alloy, Sand Castings, 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5), Precipitation Heat Treated

2023-12-13

WIP

AMS4442J

This specification covers a magnesium alloy in the form of sand castings.