Search Results

Standard

ALUMINUM ALLOY EXTRUSIONS 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, Stress Relieved, and Overaged

1988-10-01

HISTORICAL

AMS4157B

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing.

Standard

ALUMINUM ALLOY RINGS, ROLLED OR FORGED 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated

1988-10-01

HISTORICAL

AMS4312A

This specification covers an aluminum alloy in the form of rolled or forged rings.

Standard

ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED OR COLD FINISHED 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)

1988-10-01

HISTORICAL

AMS4120K

This specification covers two tempers of aluminum alloy in the form of bars, rods, and wire.

Standard

ALUMINUM ALLOY SHEET AND PLATE 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated

1988-10-01

HISTORICAL

AMS4027K

This specification covers an aluminum alloy in the form of sheet and plate.

Standard

ALUMINUM ALLOY SHEET AND PLATE 2.5Mg - 0.25Cr (5052-H32) Strain Hardened, Quarter-Hard, and Stabilized

1988-10-01

HISTORICAL

AMS4016H

This specification covers an aluminum alloy in the form of sheet and plate.

Standard

COPPER WIRE, OXYGEN-FREE 99.95(Cu+Ag) Annealed

1988-10-01

HISTORICAL

AMS4701D

This specification covers one type of copper in the form of wire.

Standard

ALUMINUM ALLOY PLATE 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved and Precipitation Heat Treated

1988-07-01

HISTORICAL

AMS4221

This specification covers an aluminum alloy in the form of plate 1.5 inch (38 mm) and over in nominal thickness.

Standard

SOLDER, TIN - LEAD, EUTECTIC 63Sn - 37Pb

1988-07-01

HISTORICAL

AMS4751A

This specification covers a tin-lead alloy in the form of bars, ingots, pellets, ribbon, and round wire.

Standard

TOLERANCES, METRIC Copper and Copper Alloy Seamless Tubing

1988-07-01

HISTORICAL

MAM2223A

This specification covers established metric manufacturing tolerances applicable to copper and copper alloy seamless tubing ordered to metric (SI) dimensions. These tolerances apply to all conditions, unless otherwise noted.

Standard

ALUMINUM ALLOY SHEET, CLAD TWO SIDES 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed

1988-07-01

HISTORICAL

AMS4064B

This specification covers an aluminum alloy in the form of sheet.

Standard

ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) (See 8.2) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated

1988-07-01

HISTORICAL

AMS4066A

This specification covers an aluminum alloy in the form of seamless, drawn, round tubing 0.500 inches (12.70 mm) and over in OD with wall thickness of 0.029 - 0.500 inch (0.74 - 12.70 mm).

Standard

ALUMINUM ALLOY WIRE 5.0Mg - 0.12Mn - 0.12Cr(5056-0) Annealed

1988-07-01

HISTORICAL

AMS4182D

This specification covers an aluminum alloy in the form of wire.

Standard

COPPER SHEET, STRIP, AND PLATE Soft Annealed

1988-07-01

HISTORICAL

AMS4500F

This specification covers unalloyed copper in the form of sheet, strip, and plate.

Standard

ALUMINUM ALLOY EXTRUDED STRUCTURAL SHAPES 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated

1988-07-01

HISTORICAL

AMS4113B

This specification covers an aluminum alloy in the form of extruded shapes such as angles, channels, tees, zees, I-beams, and H-beams.

Standard

ALUMINUM ALLOY SHEET, CLAD ONE SIDE 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed

1988-07-01

HISTORICAL

AMS4063B

This specification covers an aluminum alloy in the form of sheet.

Standard

SILICON BRONZE RODS AND BARS, 95.5Cu - 3.2Si, Hard Temper

1988-04-01

HISTORICAL

AMS4615E

This specification covers one type of bronze in the form of rods and bars.

Standard

ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.26Cr (7011 Alclad 7075-0)

1988-04-01

HISTORICAL

AMS4196

Standard

ALUMINUM ALLOY CASTINGS, SAND 8.0Cu - 6.0Mg - 0.50Mn - 0.50Ni (A240.0-F) As Cast

1988-04-01

HISTORICAL

AMS4227C

This specification covers an aluminum alloy in the form of sand castings.

Standard

ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated Straightened

1988-04-01

HISTORICAL

AMS4167F

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing.

Standard

ALUMINUM ALLOY CASTINGS, SAND 5.0Si - 1.2Cu - 0.50Mg (355.0-T51) Precipitation Heat Treated

1988-04-01

HISTORICAL

AMS4210H

This specification covers an aluminum alloy in the form of sand castings.