Search Results

This paper presents the effect of fuel atomization at an intake manifold on the combustion characteristics of a spark-ignition engine. Four sets of fuel-supply devices were tested which have much difference in atomization characteristics in terms of the mean droplet size ranging from wall film to 7 um S.M.D. Over the whole operatable range of mixture strength, the fuel atomization did not give any effect on BMEP, BSFC and volumetric efficiency, but had an effect on the engine stability at lean operation limit under most operating conditions. This atomization effect was shown to be systematically characterized by mapping on the ignition timing and A/F plane. The appearance of partial-burn limit on the map was successfully verified by the combustion analysis using a correlation procedure on cycle by cycle basis.

This paper presents the fuel atomization effect of a fuel supply system on the lean burn characteristics of a spark-ignition engine and its mechanism. The fuel supply system can realize extremely different two state of atomization, i.e., wall-film of fuel flow and ultra-fine spray (less than 7 um S.M.D. by Malvern measurement). For the first step of the study, the atomization effect is examined under steady operation; several operating parameters including cyclic variability are expressed against the A/F over the wide range of operating condition. Within the operation limits, the fuel atomization does not affect any parameters, while it gives pretty much influence on the lean operation limit. Furthermore, this influencing behavior strongly depends on the throttle valve position and its opening.