Search Results

The objective of this article is to clarify the effect of thermal and equivalence ratio stratification on Homogeneous Charge Compression Ignition (HCCI) combustion under several conditions with three-dimensional computational fluid dynamics (3D CFD). Reynolds Averaged Navier-Stokes (RANS) simulation was used to calculate in-cylinder fluid dynamics. The 3D CFD simulation is also coupled with detailed chemical reaction to calculate HCCI combustion. First, the study with a simple engine model reveals that thermal stratification is more effective for prolonged combustion duration, which is a key factor for a high load limit of HCCI combustion, than equivalence ratio stratification. Thermal stratification has two-stage combustion: the combustion propagates from hot region slowly at first and then ignites in the entire in-cylinder region. Owing to this phenomenon, thermal stratification is more effective to mitigate HCCI combustion.

A great deal of interest is focused on Homogeneous Charge Compression Ignition (HCCI) combustion today as a combustion system enabling internal combustion engines to attain higher efficiency and cleaner exhaust emissions. Because the air-fuel mixture is compression-ignited in an HCCI engine, control of the ignition timing is a key issue. Additionally, because the mixture ignites simultaneously at multiple locations in the combustion chamber, it is necessary to control the resultant rapid combustion, especially in the high-load region. Supercharging can be cited as one approach that is effective in facilitating high-load operation of HCCI engines. Supercharging increases the intake air quantity to increase the heat capacity of the working gas, thereby lowering the combustion temperature for injection of the same quantity of fuel. In this study, experiments were conducted to investigate the effects of supercharging on combustion characteristics in an HCCI engine.

Gear shift feeling is often an important factor which appeals to motorcycle riders. Therefore, it is important for designers to create a pleasant gear shift feeling when developing a motorcycle. Sensory evaluation tests are indispensable for quantifying the gear shift feeling, but are very difficult to conduct with an actual motorcycle. Therefore, we developed a simulator dedicated to sensory evaluation tests, used it to conduct sensory evaluation tests, and thus clarified the relationship between the physical amount of gear shift properties and gear shift feeling. This paper describes the development of the simulator, the sensory evaluation tests conducted on gear shift feeling using the simulator, and the results of analysis.

This paper describes the design and features of a new-type data acquisition system for racing motorcycles. With the technological advances of developments and measurements of the racing motorcycles, the functions of the system needed to be enhanced to incorporate the following: to extend number and type of input signals, to efficiently compare the large amount of data which were acquired in different test conditions, to annotate measured data with test conditions and rider comments, to operate simply and easily from the measurement to the analysis, and to have compact and light on-board hardware to ensure competitive riding. The integrated data acquisition system was newly developed with consideration of these requirements. The new system is composed of an onboard system, a remote data-analyzer which is a personal computer with customized software, and a remote data-buffer. The on-board system is composed of a core-module and function-modules.