Search Results

Since the monolithic ceramic substrate was introduced for automotive catalytic converters, the reduction of the substrate wall thickness has been a continuing requirement to reduce pressure drop and improve catalytic performance. The thin wall substrate of 0.10 mm (4 mil) thick wall/400 cpsi cell density has been introduced to production by achieving mechanical strength equivalent to a conventional 0.15 mm (6 mil)/400 cpsi substrate. Although a round cross-section substrate can have a reduced catalyst volume compared to an oval cross-section substrate because of uniform gas flow distribution, the smaller cross-section of the round substrate increases pressure drop. The thin wall technology was applied to the round substrate to offset the pressure drop increase and to further improve catalytic performance.

Automotive catalysts with a good thermal durability have been developed by modifying the composition of additives. The stability of alumina supports against the loss of the surface area depends on the ionic radius and amount of additives. Some lanthanides and alkaline earthes with large ionic radii of 0.11-0. 15nm are most effective. Among these elements, lanthanum improves not only the alumina stability but the catalytic activities of rhodium and cerium oxide. Infrared spectroscopic studies show that lanthanum oxide affects NO adsorbed on Rh to improve the activity for NO reduction. Moreover, lanthanum forms the complex oxide with cerium to improve the activity of cerium oxide. CO pulse reactions on the complex oxide (Ce, La)O2 -x have proved that the oxygen defect in the lattice promotes the diffusion of oxygen atoms to improve the oxide activity.