Search Results

In an effort to create computer models to promote rapid, cost-effective prototyping while easing design changes, more information about how people interact with seats is needed. Predicting the occupant location, their geometry, and motion within a vehicle leads to a better determination of safety restraint location, controls reach, and visibility - factors that affect the overall operation of the vehicle. Based on the Michigan State University JOHN model, which provides a biomechanical simulation of the torso posture, experiments were conducted to examine the change of postures due to seat and interior package factors. The results can be incorporated into the posture prediction model of the RAMSIS program to give a more detailed prognosis of the spine curvature and refine the model-seat interactions. This paper will address findings of the experimental study with relation to model development.

This paper describes additional and more recent results from the DaimlerChrysler study of HANS that includes a sensitivity analysis of HANS performance to variations in crash dummy neck length and other impact test conditions. The objective of the tests was to determine the robustness of the HANS concept in a variety of conditions that might occur in actual use. The results show that the variations in test parameters do effect injury measures from the crash dummy, but HANS provides substantial reductions in injury potential in all cases compared to not using HANS. Also, no injuries were indicated with HANS.

A comparative investigation of airbag and HANS driver safety systems was carried out (HANS, is a Registered Trademark in the U.S.A.). With both systems, head and neck loads were reduced from potentially fatal values to values well below the injury threshold. Both systems performed similarly in reducing the potential for driver injury. For this reason and given the high costs of development and testing, there is no justification for further development of airbags for racing.

Seat factors are characteristics of seats that influence people's postures. Seat factors such as lumbar prominence and seat pan stiffnesses were defined and measured for a variety of automotive seats. Seat factors such as these serve as a basis for evaluating and comparing seats. They were useful for selecting seats and designing experiments for human subject testing in the ASPECT program. Seat factors are also candidates for independent variables in statistical posture prediction models. The Seat factors described in this paper were measured with the current J826 manikin. They will be redefined for use with the new ASPECT manikin.

Extensive crash sled testing and analysis has recently led to the development of a new HANS prototypes for use in FIA F1. The performance of HANS prototypes has been studied with various conditions of HANS design geometry and impact direction. The new HANS prototypes have been found to substantially reduce injurious motions and forces of the head and neck, and the new HANS is lighter, more compact, and performs better than the currently available HANS. Use of HANS by FIA F1 drivers has been initiated.

Since the 1960's, automotive seats have been designed and evaluated with tools and procedures described in the SAE Recommended Practice J826. The SAE J826 design template and testing manikin each have a torso with a flat lower back shape and with a single joint at the H-point. The JOHN models provide a more anatomically detailed representation of human shape and movement. The articulations of the JOHN torso (pelvic, lumbar, and thoracic) segments are coupled so that their relative positions are determined by a single parameter related to spinal curvature. This paper describes the development and use of the JOHN biomechanical models for seating design.

The human torso includes three major segments, the thoracic (rib cage) segment, lumbar segment, and pelvic segment to which the thighs are attached. The JOHN model was developed to represent the positions and movements of these torso segments along with the head, arms, and legs. Using the JOHN model, a new seat concept has been developed to support and move with the torso segments and thighs. This paper describes the background of the biomechanically articulated chair (BAC) and the development of BAC prototypes. These BAC prototypes have been designed to move with and support the thighs, pelvis, and rib cage through a wide variety of recline angles and spinal curvatures. These motions have been evaluated with computer modeling and with initial experience of human subjects. Results from computer modeling and human subjects show that the BAC will allow a broad range of torso postures.

Comfort in automotive seating is greatly influenced by posture. Back contours that reflect the actual postures of seated people have been developed by researchers at Michigan State University (MSU). This new data on seating postures has been interpreted to aid the development of automobile seat backs, enhancing the comfort of the seats. However, applying new contours to seats with current frame and structure designs creates problems of accurately and repeatably determining H-point compliance with the SAE 3D H-point machine. Consequently, a new seat back has been designed that accomplishes both improved comfort without sacrificing the accurate measurement of H-point.