Search Results

The High Efficiency Solid State Lighting with Integrated Adaptive Control (HELIAC) system was developed to independently detect the presence of green plant tissue and to direct light only to those locations. During testing of the HELIAC system, a major factor interfering with effective tissue detection was reflectance of sensed wavebands from the walls and ceiling causing false positives. Since it is desirable to have reflective surfaces to maintain higher light levels with less power, selective reflection systems that absorb some wavebands but reflected others were tested. A test device was fabricated to measure the reflection of red, green, and blue light from a variety of colored mirrors. It was observed that both pink and purple tinted mirrors reduced the reflection of green wavebands more than red and blue wavebands. This effect could also be obtained by using colored films attached to a silvered mirrored surface.

The Deployable Vegetable Production System (VEGGIE) was originally developed as a way to produce fresh vegetables on the ISS with minimal resources. We are reassessing this system for use in lunar habitats to produce palatable, nutritious, and safe fresh food, provide a recreational tool, and provide a platform to support biological life support development by allowing in situ study of crop productivity and air and water revitalization. The VEGGIE system consists of plant growth chambers that can be stowed in a volume less than 10% of their deployed volume, while still providing the light output and root zone capabilities necessary to support high plant productivity rates. The system has significantly reduced logistical and operational requirements compared to other plant growth systems, and is of a modular design to allow logistical flexibility in terms of transport options and placement in a habitat structure.

The ECLSS (Environmentally Controlled Life Support System) project goals are to identify key requirements and guidelines for a Life Support System (LSS) for surface missions based on the Exploration Spirals, to review the various technology options and candidates to fulfill the life support functionality, and to conduct initial trades and assessments at a high level. With the completion of the first six month phase of the project, ORBITEC has generated and shown that for each Exploration Spiral, different LSS architectures are optimal, but when an entire mission model is considered, hybrid systems become more attractive. Also, we can easily show that future spiral requirements should and will influence the technologies and level of closure for earlier spiral developments to reduce overall development and implementation costs, and to increase commonality across the Constellation systems.

When overhead electric lights are used for plant growth, inefficiency occurs due to inability to accurately target light. Light falls between young plants, but as they grow, shading occurs, requiring more light to achieve acceptable productivity. We have developed an intracanopy light-emitting diode (LED)-based system that can deliver light throughout the foliar canopy of crop stands and keep pace with crop growth. LEDs having narrow red and blue emission wavebands were selected. An array of 16 “Lightsicles” was constructed, each consisting of 20, 2.5 cm2 LED “light engines” containing 80 LEDs mounted along a strip. Measurements of light level and power usage have been taken and plant-growth testing is underway.

In-situ resource utilization (ISRU) is an important part of current mission architectures for both a return to the Moon and the eventual human exploration of Mars. ORBITEC has developed and demonstrated an innovative direct energy processing approach for carbon-reduction of lunar and Martian regolith that can operate in a nearly closed-loop manner. Carbon-reduction of regolith produces oxygen and a variety of other useful products, including silicon, iron and glass ceramic materials. In addition, various ISRU propulsion technologies that utilize lunar and Martian resources have been developed and demonstrated. Work is also being conducted with the USDA on techniques to use biomass and waste materials to manufacture items such as shelters, furniture, filters and paper. Atmospheric carbon dioxide on Mars would be used to support the production of biomass in excess of life support needs to be used as the raw material to manufacture useful products on-site.

A common question for students to ask educators is “When am I ever going to use this?” An excellent way to answer that question is to demonstrate how interrelated many subjects are. At ORBITEC in Madison, WI, we are developing systems to help teachers demonstrate the exciting interrelationships of science, math and technology using activities related to growing plants in space. We are developing two portable plant growth systems that integrate multiple disciplines, enriching students’ classroom experiences. Each portable growth unit is based on similar principles. The Space Garden and Biomass Production Education System (BPES) are growth units for indoor use that utilize a bellows technology to create a greenhouse-like environment. The Space Garden is a personal growth unit that a student can use individually while the BPES will be 0.25 m2, allowing larger-scale experimentation. The Space Garden will be best used in classrooms of grades four through seven.

As part of the PRU project a new plant lighting system has been developed. System design focused on light source development, chamber optical performance improvements and electronics optimization. Central to the lighting system performance is a high density LED Light Engine, enabling increased spectral diversity, higher irradiance levels, enhanced uniformity and improved efficiency. Chamber wall surface materials were tested to minimize the vertical irradiance gradient and improve planar uniformity. Total lighting system efficiency was improved through the use of switching converter LED drive circuitry. As an alternative to the LED light source, an advanced planar fluorescent lighting source has also been developed.

The Biomass Production System (BPS) was flown on the ISS for 73 days as part of the Increment 4 mission. To obtain maximum benefit from the long mission duration, numerous manual crew procedures were incorporated into the BPS experiments. These procedures included gas sampling, root module priming, harvesting, pollination, filter cleaning, water refill, and water sampling. On-orbit crew assessments were filled out for each of these procedures to evaluate the ability of BPS to accommodate them. The assessment asked questions about each phase of an activity and solicited recommendations for improvements. Further analysis of most procedures was provided by detailed video made on-orbit and multiple post-flight crew debriefs. Most assessments indicated no need for improvements, but a number of crew suggestions will be incorporated into hardware and procedure updates.

The Biomass Production System, recently flown on the ISS for 73 days, demonstrated significant advancements in functional performance over previous systems for conducting plant science in microgravity. The Biomass Production System (BPS) was the first flight of a system with multiple, independently controlled, plant growth chambers. Each of four chambers was controlled separately with respect to temperature, humidity, light level, nutrient level, and CO2, and all were housed in a double Middeck locker-sized payload. During the mission, each of the subsystems performed within specification. This paper focuses on how the performance of the BPS hardware allowed successful completion of the preflight objectives.

Based upon the development experience and flight heritage of the Biomass Production System, the Plant Research Unit embodies the next generation in the evolution of on-orbit plant research systems. The design focuses on providing the finest scientific instrument possible, as well as providing a sound platform to support future capabilities and enhancements. Performance advancements, modularity and robustness characterize the design. This new system will provide a field ready, highly reliable research tool.

The PESTO (Photosynthetic Experiment System Testing and Operation) experiment flew in the Biomass Production System (BPS) to International Space Station (ISS) on STS-110 (Atlantis) April 8, 2002, and returned on STS-111 (Endeavour) June 19, 2002, after 73 days in space. The ground control was conducted on a two-week delay at Kennedy Space Center in a BPS unit under environmental conditions comparable to ISS. Wheat (Triticum aestivum cv Apogee) and Brassica rapa cv Astroplant were independently grown in root modules for multiple grow-outs. On-orbit harvests, root modules exchanges and primings, seeds imbibitions, and gas and water samplings occurred at periodic intervals; all were replicated in ground controls. Many operations required crew handling and open access to individual chambers, allowing the exchange of microorganisms between the crew environment and the BPS modules.

The ORZS flight experiment is designed to measure gas diffusion through plant growth substrates at varying water content levels in microgravity. This information is critical for proper water management and the prevention of root zone hypoxia during plant growth and advanced life support (ALS) biomass production experiments. Microgravity data that suggest enhanced hysteresis in water retention may alter the gas diffusion process, changing the optimum root zone moisture control set point in μg plant growth systems. Small gas diffusion cells are being evaluated as measurement systems for coarse-textured plant growth media at 1g and 0g. Design guidelines aim to minimize gravitational force while maintaining a representative porous medium. Substrate physical properties (e.g., water retention) pose additional complications for diffusion coefficient determination.

The Plant Research Unit (PRU) is the Space Station Biological Research Program plant growth facility being developed for the International Space Station. The plant habitat is designed for experiments in near-zero gravity or it can be rotated by the ISS Centrifuge for experiments at any gravity level from microgravity to twice Earth's gravity. Plant experimentation will be possible in multiple Plant Research Units at one time, isolating the effect of gravity on the biological specimens. The PRU will provide and control all aspects of a plant's needs in a nearly closed system. In other words, the shoot and root environments will not be open to the astronaut's environment except for experiment maintenance such as planting, harvesting and plant sampling. This also means that all lighting, temperature and humidity control, nutrient delivery, and air filtering and cleaning must be done in a very small volume, with very little mass and power usage and with minimal crew time.

The Biomass Production System (BPS) is a double middeck locker payload designed to fly on the Orbiter or Space Station. The BPS contains four plant growth chambers (PGCs) with independent control of temperature, humidity, lighting, CO2, and nutrient solution delivery, allowing for multiple experimental treatments. The BPS provides several features to support on-orbit science activities including the ability to downlink system and science data, video cameras with framegrab capability to collect images for recording plant development, access to plants to perform activities such as pollination or tissue sampling, and gas and fluid sampling ports for sampling of the plant environment. Other capabilities include the ability to conduct CO2 drawdowns, allowing photosynthetic measurements, and the ability to meter plant CO2 and water use. Several technology developments have been evaluated for possible implementation during future upgrades to enhance science capabilities.

The Plant Research Unit development effort will provide a high-performance and highly versatile, controlled environment plant growth chamber for space-based variable gravity science and biotechnology investigations on the International Space Station. Temperature, humidity, atmospheric composition, lighting, and nutrient delivery are the critical parameters to control in an automated and reliable way. Access to plant material on-orbit and maintenance of the unit with minimal crew effort are other major requirements, as is a modular design allowing easy subsystem/technology change-outs so that science capability and maintainability are maximized. The Plant Research Unit (PRU) development program is based on the results of the Biomass Production System (BPS) and many other technical developments, and uses the BPS as a risk mitigation prototype for the PRU.

A soil moisture sensor system consisting of small heat-pulse probes, a microcontroller, and software for data acquisition and signal conditioning was developed for use in space based plant growth units. The microcontroller allows the sensors to be used in a control application with minimum time demands on the control subsystem. A single digital serial link may be shared by up to 16 microcontrollers with 8 sensors each, for a total of 128 sensors. The microcontroller independently applies heat cycles to determine the current moisture level, and responds to a request from the computer with the last known value. Using the microcontroller system, repeatability testing was completed for wet 1–2 mm arcillite. The standard deviation in wet arcillite over a 16-hour period was about 3%. Software filtering can be used to reduce the standard deviation further.

The objective of the Fluid Handling and Maintenance Experiment (FHAME) is to research, test, and demonstrate liquid/gas phase control in fluid handling subsystems in microgravity. FHAME is currently being developed as a risk mitigation experiment for the upcoming verification and science investigations in plant growth systems, especially the Biomass Production System (BPS) and the Plant Research Unit (PRU). Because FHAME contains controlled fluid handling systems, a large suite of sensors, data acquisition, and visual observation capability, it is well suited for empirical research and testing of movement and to assessing the liquid/gas characteristics for a wide variety of applications. Its first application is to assess fluid priming and gas/liquid characteristics in a particulate bed. FHAME can play a major role in the development of future new nutrient delivery systems for plant growth application in addition to many fluid and gas/liquid empirical research investigations.

The Biomass Production System (BPS) was developed to meet science, biotechnology and commercial plant growth needs in Space. The BPS is a double middeck locker equivalent payload with four internal plant chambers. The chambers can be removed to allow manipulation or sampling of specimens, and are sealed to allow CO2 and water vapor exchange measurements. Each of the growth chambers has independent control of temperature, humidity, lighting, and carbon dioxide levels. Preliminary acceptance and performance testing has demonstrated temperature control within ±1.0°C (between 20°C and 30°C) and humidity control within ±5% (between 60% and 90% RH, depending on ambient temperature and plant load). The fluorescent lighting system provides light levels between 60 and 350 μmol m−2s−1. The CO2 control system controls to the greater of ±50 ppm or ±5% (with plants, as a scrubber is not currently available).

The ASTROCULTURE™ (ASC) middeck flight experiment series was developed to test and integrate subsystems required to grow plants in reduced gravity, with the goal of developing a plant growth unit suitable for conducting quality biological research in microgravity. Flights on the Space Shuttle have demonstrated control of water movement through a particulate rooting material, growth chamber temperature and humidity control, LED lighting systems and control, recycling of recovered condensate, ethylene scrubbing, and carbon dioxide control. A complete plant growth unit was tested on STS-63 in February 1995, the first ASC flight in which plant biology experiments were conducted in microgravity. The methods and objectives used for control of environmental conditions in the ASC unit are described in this paper.

The ASTROCULTURE™ flight unit flown as part of the SPACEHAB-03 mission on STS-63 was a complete plant growth system providing plant lighting, temperature control, humidity control, water and nutrient delivery, a CO2 control system, nutrient control using the NASA Zeoponics system, an ethylene photocatalysis unit, a control and data acquisition system, and plant video. The objective of the ASTROCULTURE™-4 experiment was to continue technological assessment of these environmental control subsystems. Plants were included in this package for the first time. Two plant species were flown, rapid cycling ‘Wisconsin Fast Plants’ (Brassica rapa), and dwarf wheat (Triticum aestivum cv. ‘Super Dwarf’). Growth and development of both plant species on orbit appeared normal and similar to that of plants grown under terrestrial conditions.