Search Results

The Water Supply Assembly (WSA) is part of the Liquid Management Section (LMS) of the Hermes Environmental Control and Life Support Subsystem (ECLSS) (see ref. [1] and [2]). The WSA has to provide pure water for drinking and food preparation (rehydratation of dry food and beverage powder) and to provide pure water for hygiene purposes (oral hygiene and towel wetting). To obtain different desired temperatures (as well as different quantities of water to be dispensed), a heating device, using electrical foils, and a cooling device, using a water/water heat exchanger have been designed with regard to the critical mass and power requirements. Two dispensers are used to fill food/beverage or hygiene (towels) containers. As part of the Hermes C1 phase, breadboard models of the heating device (heater) and of the cooling device (chiller) have been manufactured and functionally tested.

This paper presents results of new development work carried out in the context of the Water Conditioning Assembly (WCA) which is part of the Liquid Management Section (LMS) of the Hermes Environmental Control and Life Support Subsystem (ECLSS) (see ref [1] and [2]). Its task is to condition and monitor the quality of highly pure water which has been produced in two fuel-cell stacks by the oxidation of hydrogen. This water will be used for different cooling elements (e.g. water evaporator, water sublimator) and as potable water for drinking and food purposes. The assembly consists mainly of: a hydrogen separator, providing for removal of dissolved and gaseous residual hydrogen from the fuel-cell water.