Search Results

The goal of this investigation was to gain a better understanding of the effect of fuel/air charge composition on the dynamical structure of cyclic dispersion in lean-fueled spark ignition engines. Swirl and fuel injection timing were varied on a single-cylinder research engine to investigate the effects of charge motion and stratification on prior-cycle effects under lean operating conditions. Temporal patterns in the cycle-to-cycle combustion dynamics were analyzed using return maps, Shannon entropy, and symbol sequence statistics. Our results indicated a transition from stochastic behavior to noisy nonlinear determinism as equivalence ratio was decreased from near stoichiometric to very lean conditions. The equivalence ratio at which deterministic effects became important was strongly influenced by swirl and fuel injection timing. A comparison of our results and previous results from an eight-cylinder production engine showed similar trends.

A detailed investigation of the intake port mixing process was performed on a fired single cylinder port fuel injected research engine. The liquid fuel droplets were studied using several different methods of analysis ranging from spatially and temporally resolved to spatially and temporally averaged data. Comparisons of the port mixture preparation results were made to the combustion performance of the engine in order to develop correlations between the mixing process and resulting engine performance. It is suggested that while the nature of the fuel spray produced by the injector is important, there are several other factors that influence fuel delivery to the cylinder. Calculations are given that indicate drops must be very small to entrain in the flow and avoid wall wetting. Secondary drop formation mechanisms may ultimately determine the nature of the fuel delivery to the cylinder and have an impact on combustion performance.

It is well known that hydrogen addition to spark-ignited (SI) engines can reduce exhaust emissions and increase efficiency. Micro plasmatron fuel converters can be used for onboard generation of hydrogen-rich gas by partial oxidation of a wide range of fuels. These plasma-boosted microreformers are compact, rugged, and provide rapid response. With hydrogen supplement to the main fuel, SI engines can run very lean resulting in a large reduction in nitrogen oxides (NOx) emissions relative to stoichiometric combustion without a catalytic converter. This paper presents experimental results from a microplasmatron fuel converter operating under variable oxygen to carbon ratios. Tests have also been carried out to evaluate the effect of the addition of a microplasmatron fuel converter generated gas in a 1995 2.3-L four-cylinder SI production engine. The tests were performed with and without hydrogen-rich gas produced by the plasma boosted fuel converter with gasoline.

We describe a method for detecting and quantifying time irreversibility in experimental engine data. We apply this method to experimental heat-release measurements from four spark-ignited engines under leaning fueling conditions. We demonstrate that the observed behavior is inconsistent with a linear Gaussian random process and is more appropriately described as a noisy nonlinear dynamical process.