Search Results

As part of an ongoing investigation, the influence of In Cylinder Pressure (ICP) and fuel injection pressure on the soot formation processes in a diesel fuel spray were studied. The work was performed using a rapid compression machine at ambient conditions representative of a modern High Speed Direct Injection diesel engine, and with fuel injection more representative of full load. Future tests will aim to consider the effects of pilot injections and EGR rates. The qualitative soot concentration was determined using the Laser Induced Incandescence (LII) technique both spatially and temporally at a range of test conditions. Peak soot concentration values were determined, from which a good correlation between soot concentration and injection pressure was observed. The peak soot concentration was found to correlate well with the velocity of the injected fuel jet.

It is expected that heavy duty engine legislation in Europe will continue to drive down test cycle BSNox emissions to levels of between 2.5 and 3.5 g/kWh by 2005, with a reduction in particulate emissions to between 0.02 and 0.08 g/kWh. It is unlikely that re-optimisation of existing engine combustion systems alone, such as further retardation of the fuel injection timing, will be sufficient to meet the legislated BSNox targets. Other measures, such as cooled EGR or new aftertreatment systems must therefore be considered. Such emissions control strategies may conflict with other market requirements for improved fuel consumption and increased power density. In this paper, research at Ricardo into the configuration of a premium heavy duty truck engine for the European market for model year 2005 and beyond, is described. A review of the market requirements, projected to 2005 was undertaken in order to define the specification of the concept engine.