Hover/Ground-Effect Testing and Characteristics for a Joint Strike Fighter Configuration 962253
Hover and ground-effect tests were conducted with the Lockheed-Martin Large Scale Powered Model (LSPM) during June-November 1995 at the Outdoor Aerodynamics Research Facility (OARF) located at NASA Ames Research Center. This was done in support of the Joint Strike Fighter (JSF) Program being lead by the Department of Defense. The program was previously referred to as the Joint Advanced Strike Technology (JAST) Program. The tests at the OARF included: engine thrust calibrations out of ground effect, measurements of individual nozzle jet pressure decay characteristics, and jet-induced hover force and moment measurements in and out of ground effect.
The engine calibrations provide data correlating propulsion system throttle and nozzle settings with thrust forces and moments for the bare fuselage with the wings, canards, and tails removed. This permits measurement of propulsive forces and moments while minimizing any of the effects due to the presence of the large horizontal surfaces. The engine calibrations were used later to determine thrust for hover testing at the OARF and for transition testing which took place in the NASA Ames 80- by - 120-foot Wind Tunnel (Reference 1).
The jet decay characteristics reflect the jet entrainment properties and are related to the aircraft suckdown characteristics. The JSF program provided the opportunity to obtain model scale effects using two models; one at small-scale and one at large-scale. Examples of data from these tests will be presented out of ground effect which will demonstrate the effect of scale. For one JSF configuration, two small-scale models and one large-scale model were tested. Different values for the lift loss out of ground effect were obtained for each configuration. These differences were examined and are found to be largely dependent on the jet efflux characteristics.
The jet-induced hover forces and moments are presented in and out of ground effect. For the hover testing the model is methodically built up from the bare fuselage, to include the wings, canards, and vertical tails, to determine the effects of each on measured lift loss. Other components such as weapons bay doors, landing gear doors, and other lift improvement devices and their effect on the jet-induced forces and moments are also examined.
Citation: Hange, C., Naumowicz, T., Wardwell, D., Margason, R. et al., "Hover/Ground-Effect Testing and Characteristics for a Joint Strike Fighter Configuration," SAE Technical Paper 962253, 1996, https://doi.org/10.4271/962253. Download Citation
Author(s):
Craig Hange, Tim Naumowicz, Doug Wardwell, Richard Margason, Tom Arledge
Affiliated:
NASA Ames Research Center, Defense Group Inc.
Pages: 12
Event:
SAE International Powered Lift Conference and Exposition
ISSN:
0148-7191
e-ISSN:
2688-3627
Also in:
International Powered Lift Conference Proceedings-P-306, SAE 1996 Transactions - Journal of Aerospace-V105-1
Related Topics:
Aircraft tails
Scale models
Aircraft
Thrust
Wind tunnel tests
Defense industry
Canards
Wings
Fuselages
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »
