Modeling the Effects of Split Injection Scheme on Soot and NO Emissions of Direct Injection Diesel Engines by a Phenomenological Combustion Model 962062
A multizone phenomenological combustion model, in which the fuel bum rate is governed by the rate of fuel vaporization and mixing, is developed to study the effects of split injection schemes on NO and soot emissions of direct injection diesel engines. This model is calibrated with the experimental data of a single injection case. Comparison between the results calculated by the model and experimental results shows that the model has a good predictive capability for cylinder pressure, heat release rate, NO & soot emissions. The study of split injection parameters, including the delay dwell between injection pulses, the fuel quantity injected in the second pulse and the fuel pressure of the second injection, is carried out. The results predicted by the model show that the soot can be effectively reduced without increasing NO emission and fuel consumption with the split injection in which 10-30% of total fuel is injected in the second injection at about 15 °CA after top dead center.
Citation: Li, J., Chae, J., Lee, S., and Jeong, J., "Modeling the Effects of Split Injection Scheme on Soot and NO Emissions of Direct Injection Diesel Engines by a Phenomenological Combustion Model," SAE Technical Paper 962062, 1996, https://doi.org/10.4271/962062. Download Citation
Author(s):
Jianwen Li, Jae Ou Chae, S. M. Lee, J. S. Jeong
Affiliated:
Xi'an Jiaotong Univ., Inha Univ., Seoul National Univ.
Pages: 8
Event:
1996 SAE International Fall Fuels and Lubricants Meeting and Exhibition
ISSN:
0148-7191
e-ISSN:
2688-3627
Also in:
Modeling and Diagnostics in Diesel Engines-SP-1205
Related Topics:
Diesel / compression ignition engines
Fuel consumption
Particulate matter (PM)
Combustion and combustion processes
Simulation and modeling
Emissions
Engine cylinders
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »