Effects of Fiber and Property Orientation on “C” Shaped Cross Sections 910049
Glass fiber reinforced bumper beams are being used on increasingly more automobiles due to the weight and energy management advantages the materials have over steel. Current bumpers are manufactured using basically three fiber orientations or combinations thereof:
1)
Random, chopped and continuous
2)
Unidirectional, continuous along the length of the beam
3)
0.90, continuous on the length and perpendicular, woven
For the purpose of this paper, the composite used for all FEA models and sample moldings is a 40% continuous glass fiber reinforced, polypropolene resin based, sheet stampable thermoplastic. It is possible to assume that the results can be generatalized to other composites.
The finite element analysis found that significant increases in performances were achieved over the conventional fiber orientations. The ±45° fiber orientation over the entire beam showed the greatest improvement in stiffness over the random orientation, however, this was not considered the optimal result due to manufacturing difficulty discovered in sample molding. The computer modeling was performed using ABAQUS software. The model used is a half model with dimensions similar to that of a bumper for a 3000 pound car. The samples molded for correlation were formed in a “C” section test tool modified to have the same proportions as the FEA model.
The automotive industry continues to demand quality and performance improvements. In order to supply higher performance parts we must not be content with current designs and technology, but must continue to maximize the quality and performance not only of materials but design.
Citation: Clark, C., Bals, C., and Layson, M., "Effects of Fiber and Property Orientation on “C” Shaped Cross Sections," SAE Technical Paper 910049, 1991, https://doi.org/10.4271/910049. Download Citation
Author(s):
Christopher L. Clark, Corrine K. Bals, Mark A. Layson
Affiliated:
GE Plastics Southfield, MI
Pages: 10
Event:
International Congress & Exposition
ISSN:
0148-7191
e-ISSN:
2688-3627
Also in:
Polymer Composite Applications for Motor Vehicles-SP-0850
Related Topics:
Finite element analysis
Computer simulation
Glass fibers
Fibers
Composite materials
Materials handling
Molding
Test equipment and instrumentation
Bumpers, fasciae and grilles
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »
