Simulation of CNG Engine in Agriculture Vehicles. Part 1: Prediction of Cold Start Engine-Out Emissions Using Tabulated Chemistry and Stochastic Reactor Model 2023-24-0006
Worldwide, there is the demand to reduce harmful emissions from non-road vehicles to fulfill European Stage V+ and VI (2022, 2024) emission legislation. The rules require significant reductions in nitrogen oxides (NOx), methane (CH4) and formaldehyde (CH2O) emissions from non-road vehicles. Compressed natural gas (CNG) engines with appropriate exhaust aftertreatment systems such as three-way catalytic converter (TWC) can meet these regulations. An issue remains for reducing emissions during the engine cold start where the CNG engine and TWC yet do not reach their optimum operating conditions. The resulting complexity of engine and catalyst calibration can be efficiently supported by numerical models. Hence, it is required to develop accurate simulation models which can predict cold start emissions.
This work presents a real-time engine model for transient engine-out emission prediction using tabulated chemistry for CNG. The engine model is based on a stochastic reactor model (SRM) which describes the in-cylinder processes of spark ignition (SI) engines including large-scale and low-scale turbulence, convective heat transfer, turbulent flame propagation and chemistry. Chemistry is described using a tabulated chemistry model which calculates the major exhaust gas emissions of CNG engines such as CO2, NOx, CO, CH4 and CH2O.
By best practice, the engine model parameters are optimized by matching the experimental cylinder pressure and engine-out emissions from steady-state operating points. The engine model is trained for a non-road transient cycle (NRTC) cold start at 25°C ambient temperature and validated for a NRTC cold start at 10°C ambient temperature. The trained model is evaluated regarding their feasibility and accuracy predicting transient engine-out emissions.
