Separating-Reattaching Flows Over an Iced Airfoil 2019-01-1946

Delayed Detached Eddy Simulations (DDES) of separating-reattaching flows on the suction side of an ice-contaminated airfoil were conducted. A single-section straight-wing NACA23012 airfoil with leading-edge ice was studied. The geometry represents a realistic glaze horn-ice contamination obtained during the icing test campaigns described in [1], which has aerodynamic data for comparison. The three-dimensional transient flow behavior was simulated using the open-source flow solver OVERFLOW, version 2.2l [2] developed by NASA Langley Research Center. Configurations at three angles of attack that exhibit unsteady flow behavior starting with the bursting angle were examined at Mach number of 0.18 and Reynolds number of 1.8x10⁶. As the stall angle was approached the aerodynamic performance parameters displayed large-scale unsteadiness where periods of attached and separated flows were observed. The time-averaged results show good agreement with the aerodynamic test data. The calculated Strouhal number for the self-sustained low-frequency oscillations is consistent with the previous experimental research.