Robust NVH Engineering Using Experimental Methods - Source Characterization Techniques for Component Transfer Path Analysis and Virtual Acoustic Prototyping 2019-01-1542

A major challenge in automotive NVH engineering is to approach complex structure-borne sound and vibration problems with sufficient accuracy but reasonable experimental effort. Typical issues encountered are poor correlation between objective component performance criteria tested for during bench validation and corresponding subjective targets evaluated during system validation in the actual vehicle. Additional challenges arise from the need to impose assumptions on sophisticated physical vibration problems to reduce the complexity to a level feasible for conventional experimental test methods. This paper addresses all mentioned issues by elaborating on a system NVH engineering approach employing Virtual Acoustic Prototyping (VAP) (related to what is now often called component Transfer Path Analysis) to synthesize time domain sound and vibration responses of vibrating machinery operated in a virtual vehicle environment. One crucial step of VAP is to characterize the strength of vibrating machinery by independent quantities at the significant coupling degrees of freedom (DoF). This study puts special focus on the measurement of free velocity, suitable for machinery operated when resiliently mounted as per ISO 9611, and the in-situ measurement of blocked forces, applicable for sources connected to any type of receiving structure during operation, as per ISO/DIS 20270. In order to reduce complexity of the underlying measurements this paper investigates the possibility of using collocated sensor arrays and methods to validate assumptions imposed to abstract away from rotational coupling DoF. An electric power steering (EPS) system inducing vibrations into a sub-frame-type structure is considered as a representative automotive source-receiver installation to investigate the feasibility of free velocity and in-situ blocked force approach with respect to independent source characterization for component Transfer Path Analysis (TPA) and VAP. The obtained Virtual Acoustic Prototype is expanded using an algorithm to synthesize realistic time domain data, enabling NVH engineers to conduct reliable objective and subjective design evaluations.