Reduction of Soot Formation in an Optical Single-Cylinder Gasoline Direct-Injected Engine Operated in Stratified Mode Using 350 Bar Fuel Injection Pressure, Dual-Coil and High-Frequency Ignition Systems 2017-01-9278
The current trend toward more fuel efficient vehicles with lower emission levels has prompted development of new combustion techniques for use in gasoline engines. Stratified combustion has been shown to be a promising approach for increasing the fuel efficiency. However, this technique is hampered by drawbacks such as increased particulate and standard emissions.
This study attempts to address the issues of increased emission levels by investigating the influence of high frequency ionizing ignition systems, 350 bar fuel injection pressure and various tumble levels on particulate emissions and combustion characteristics in an optical SGDI engine operated in stratified mode on isooctane.
Tests were performed at one engine load of 2.63 bar BMEP and speed of 1200 rpm. Combustion was recorded with two high speed color cameras from bottom and side views using optical filters for OH and soot luminescence.
The results indicated that increasing the fuel injection pressure led to faster burn as well as a reduction in soot luminescence. The ionizing ignition system generated faster initial combustion. Increasing the tumble level reduced the soot luminescence at all injection pressures, but the influence was largest at the lowest fuel injection pressure. The combination of an ionizing ignition system and high fuel pressure was most beneficial for lowering soot luminescence.
Citation: Johansson, A., Hemdal, S., and Dahlander, P., "Reduction of Soot Formation in an Optical Single-Cylinder Gasoline Direct-Injected Engine Operated in Stratified Mode Using 350 Bar Fuel Injection Pressure, Dual-Coil and High-Frequency Ignition Systems," SAE Int. J. Engines 10(3):709-721, 2017, https://doi.org/10.4271/2017-01-9278. Download Citation
Author(s):
Anders N. Johansson, Stina Hemdal, Petter Dahlander
Affiliated:
Chalmers University of Technology
Pages: 13
ISSN:
1946-3936
e-ISSN:
1946-3944
Also in:
SAE International Journal of Engines-V125-3, SAE International Journal of Engines-V126-3, SAE International Journal of Engines-V126-3EJ
Related Topics:
Ignition systems
Particulate matter (PM)
Fuel injection
Fuel economy
Combustion and combustion processes
Energy conservation
Pressure
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »