Continued Study of the Pinpoint Injection Gate with the Aid of Computer Injection Simulation 2013-36-0581
In injection molds, the most common type of injection gate is the pinpoint gate. As many authors in the field of injection mold design diverge on the recommended dimensions for the pinpoint gate, the idea behind this study is to guide future mold projects for the better gate dimensions for each shape of the part to be made. Following previous studies about the pinpoint injection gate, this new study was conducted to broaden the applicability of the results. The first study was based on a flat, rectangular piece. Now, for different sets of results and to be able to apply them for a different shape of injected part, a rectangular box was used for the simulation. As with the first study, the objective is to analyze the results and to recommend the best gate dimensioning for the new shape, based on the performance of each dimension simulated. At the end of the study, a reference chart will be presented with the gate dimensions that were the most efficient in the computer simulation for each type of part, to aid in the project of future injection molds.
Citation: Pastorelli, P. and Sacchelli, C., "Continued Study of the Pinpoint Injection Gate with the Aid of Computer Injection Simulation," SAE Technical Paper 2013-36-0581, 2013, https://doi.org/10.4271/2013-36-0581. Download Citation
Author(s):
Pedro Palma Pastorelli, Carlos Mauricio Sacchelli
Affiliated:
Universidade Federal de Santa Catarina
Pages: 8
Event:
22nd SAE Brasil International Congress and Display
ISSN:
0148-7191
e-ISSN:
2688-3627
Related Topics:
Computer simulation
Molding
Simulation and modeling
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »