Design of a 4-Cylinder GTDI Engine with Part-Load HCCI Capability

Jennifer Wheeler; Dusan Polovina; Vasile Frasinel; Oliver Miersch-Wiemers; Alan Mond; Jeff Sterniak; Hakan Yilmaz

doi:10.4271/2013-01-0287

This paper focuses on the engine design portion of the Advanced Combustion Controls Enabling Systems and Solutions (ACCESS) project, a joint research project partially funded by a Department of Energy grant. The main goal of the project is to improve fuel economy in a gasoline fueled light-duty vehicle by 25% while maintaining similar performance and meeting SULEV emission standards.

A Cadillac CTS with a high-feature naturally-aspirated 3.6L V6 engine was chosen as the baseline vehicle. To achieve the target fuel economy improvement over the baseline engine configuration, gasoline turbocharged direct-injection (GTDI) technology was utilized for engine downsizing in combination with part-load lean homogeneous charge compression ignition (HCCI) operation for further fuel economy gains. The GM 2.0L I4 GTDI Ecotec engine was used as the platform for the basis of this design. The production engine hardware was redesigned to support various combustion system options to be investigated during the engine development portion of this program.

One-dimensional (1D) modeling was used to determine the optimal valve lift profiles, compression ratio and boosting configuration. Fuel economy improvements expected from the new engine design and advanced combustion controls were determined using vehicle simulation.

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Design of a 4-Cylinder GTDI Engine with Part-Load HCCI Capability 2013-01-0287

SAE MOBILUS