Topological Design Approach for an Electrical Car Chassis 2011-01-0069
The goal of this work is to optimize an automotive chassis for a 3 wheeled hybrid vehicle. This vehicle is intended for touristic and low speed performance, 2 of the more relevant features are, that the vehicle has 3 wheels and that it is battery powered by 7 cells which are distributed under the driver seat and the first line of seats. Therefore, the vehicle has to be very light but still strong enough to endure the daily loads it is driven into. In order to obtain the final topological region an improving process in the topological region's geometry was needed, starting with regions with 30 mm element's size to 16 mm element's size, so the available equipment could compute the optimization in similar amounts of time.
Topological optimization is used to acquire a very close shape to the optimal one for structural problems design from a conceptual viewpoint. This approach creates a guide to generate, in later design stages, a structural design for fully manufacturable prototypes or final products, which have optimal characteristics. In this work, topological optimization is used to develop an electrical car chassis under some static and driving loads. The optimized shape of the chassis indicates load paths along where material is preserved. Minimum weight and low strain energy are the parameters considered. Topology optimization is used to find the optimal distribution of material in a given region. Unlike shape and sizing optimization, topology optimization does not require a previous design. The design starts with a block of material formed by a large amount of finite elements and the topology optimization will rearrange the mass, so it reinforces the weak spots, and removes material from gross sections.
The final profile obtained presented good symmetry features, nevertheless, with smaller elements the solution would be more accurate, however, it can be considered enough since topology optimization is only an approach to develop designs; further optimization procedures will define a final profile.
Citation: Calvo Alfaro, P., Velázquez Villegas, F., Zepeda Sánchez, A., and García del Gállego, M., "Topological Design Approach for an Electrical Car Chassis," SAE Technical Paper 2011-01-0069, 2011, https://doi.org/10.4271/2011-01-0069. Download Citation
Author(s):
Paulo Reynaldo Calvo Alfaro, Fernando Velázquez Villegas, Antonio Zepeda Sánchez, Mariano García del Gállego
Affiliated:
Universidad Nacional Autónoma de México
Pages: 11
Event:
SAE 2011 World Congress & Exhibition
ISSN:
0148-7191
e-ISSN:
2688-3627
Related Topics:
Hybrid electric vehicles
Optimization
Starters and starting
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »